LONTAN Soft Close Drawer Slides 22 Inch Side Mount Heavy Duty Cabinet Drawer Glides 10 Pairs - Ball Bearing Full Extension Kitchen Cabinet Rails 100 LB Capacity

These are good strong drawer sliders. Please be aware that the inside dimension of your cabinet must be exactly 1 inch/1.000 wider than the drawer or it will fail the install. Each slider is a half inch wide, multiply times 2 and you get 1 inch. If your building your own cabinets the ID dimension of One Inch is critical. If the space I mentioned is larger you'll have to use metal shim plates for the drawer to work, if the inside dimension is smaller than one inch make the drawers over again. The sliders do extend to 32 inches, I bought the 18 inch models. So the drawer opens all the way.

I have punched several Lontan slides in various sizes over the years and they work great. I finally had a problem I believe was my fault from closing a drawer too hard, which broke the soft close mechanism. I three times offered to purchase the replacement part and install it myself but they shipped me a new pair instead. Customer service doesn't get any better than that. Excellent product, excellent service.

So much better made then the sliders I had to replace in the night stand. I was able to get the exact same length sliders and installation was 12 screws and done.

These drawer slides were easy to install and have worked great for our application. We use them on a pull-out trash cabinet, and they have been a significant improvement over the previous slides we had. Our old slides eventually rusted, struggled with the weight of a full trash bin, and didn't extend far enough, making it difficult to remove and replace trash bags. The Lonton full-extension slides operate smoothly, handle the load with ease, and extend much farther, providing much better access to the trash container. Overall, they feel sturdy, glide smoothly, and have solved all the issues we experienced with our previous drawer slides. I would definitely purchase them again.

These are nice drawer slides. They are well made and heavy duty. They have a smooth action. They come with screws and instructions.

I have used these on multiple projects and really like them (see photos & video). They are heavy-duty, high quality, and very well-built. Plenty of normal and slotted holes that can be used for all types of installations. Only negative is the quality of the screws. I have twisted the head off of a few of them, but I was also mounting them to hard maple, so make sure you drill a good-sized pilot hole. Also, make sure you choose a set of slides that fit the weight of what you will place in the drawer. The more 'heavy duty' the slides you buy, the harder you have to pull to open the drawer AND you will need more weight in the drawer to activate the 'soft-close' function. I used 100-pound slides for both applications shown in the photos. The slides work beautifully for my heavy-duty shop drawers filled with heavy screws and hardware; it's more difficult to get the soft close mechanism, to activate in the smaller and lighter kitchen cabinet drawer. These were definitely over-kill for the kitchen cabinet drawers (although still work great) but awesome for the pull-out trays with the heavier appliances. Highly recommend these slides and will continue to buy them!

I bought these to replace broken sliders on a really large drawer. They installed easily and handle the heavy drawer just fine. Soft close works great.

I ordered 10 pairs to retrofit 10 drawers that had the simple Euro drawer slides. For the most part it went well. I read reviews and made sure to order better screws, and I'm glad I did. I had one instance where I thought "I'll just use the included screw here" and sure enough it snapped when screwing in. Cheap. I have problems with 2 of the slides (out of the 20 total... and not 2 on the same drawer but on different drawers) where the self-closing part of the slide does not fully "catch" when pulling out the drawer. I've fiddled with it every which way I could think of, adjusting the drawer left, right, inwards, outwards, etc. but it seems like unless the drawer part is pressed up pretty hard against the slider part, when pulling out the drawer, that plastic part does not catch the pin all the way. The end result is that one side of the drawer isn't set to pull it back closed, so you shut the drawer, one side catches and the springs start to pull it closed, but it's not strong enough on its own without it's buddy on the other side, so the drawer sticks out 1/4" or so and you have to manually close it. In one case when having this issue, I used a different slide and that fixed my problem, so I'm pretty sure it wasn't an issue with the install, being out of level or skewed to one side or another, I think it's just something wonky with the self-closing mechanism. Unfortunately I had these things sitting about a year before I finally got around to installing, so I don't know if it's worth trying to replace them (I won't bother). I need 7 more of these to finish my kitchen and I'll order something else, probably just replace these 2 problem drawer slides with a different make/model and call it good. Overall I'm happy with them, I just wish those 2 didn't have issues.

I ordered 30 of the 24’’ and 20 of the 14’’. When I received them I checked them all for quality of assembly and to see if the soft close worked properly. Everything was perfect and well lubricated. The little pin for the soft close is metal. I’m glad I bought them.

It's always takes a good tug to open the drawers and you have to give a good push to ensure it closes all the way. This get annoying after a while.

The plastic soft close mechanism broke before installation was finished. I was VERY careful. But the plastic just failed. The product description said it had been upgraded with metal. But this is NOT TRUE.

They fit perfectly!