NEW 9"x6"x3" OUTDOOR CABLETEK ENCLOSURE CASE UTILITY CABLE BOX

As described

Took the old broken one off the wall and replaced it with the new one, an exact fit

Great enclosure, while this will protect mostly from the elements if you have anything that is water sensitive make sure to put a silicone strip around the seam.

JUST what I needed to replace my existing Cable Enclosure after we "cut the cord" We bought an HD antenna to see what we would get and it was awesome, so I decided to tap the HD over the air antenna to the whole house like when we had cable. My only concern was the external enclosure was seriously deteriorating from the weather and the cover was decomposing. Your hand was full of "plastic powder" when you touched it. This box was/is VERY close to the original from the cable companies original installation years ago. Actually, we STILL have a cable company feed, but it is internet only. So all I need to do is isolate one line that directly feeds the web modem and router and them tie the HD antenna to the rest of the house via an 8 port splitter (which I only needed 5 ports). I got a single connector with a grounding block from Amazon as well for the straight thru line form the cable company to the modem . It should be grounded as well so the ground block coax connector fit the bill.

We used it to cover up the cable wires. We couldn't find what we wanted in a hardware store. This is a good value and does just what we wanted it to do.

Right size, looks ok, but poor quality. The cover always come off, and it only loosely attached. You get what you pay for.

Exactly what I needed.

A simple note explaining how it can be used would have helped. I am no expert so had to figure out that some openings can be easily cut out with a utility knife to let the cable(s) in and out. Other than that it does the job and is spacious enough to hold one or two loops and a rigid connector.