PN00218-DME2 Sabertooth Dual 12A Motor Driver for R/C Sabertooth 2X12 R/C

i've used one of these to drive a pair of 135W scooter motors at 24V for over a year now in a large mobile robot. Its flawless. These controllers are dead-reliable, easy to setup and use, and very cheap compared to the competition. They work at both 12 and 24 volts, I used mine for each at different times. I just bought two more here on amazon for my next project, and I am considering 1 more in addition! Seriously, if you need to drive a pair of brushed DC motors at 12A or less each, GET IT.

Was looking for an upgrade to a 22-year old, 1/16 scale RC tank that I am trying to bring up to more modern specs. This was the ticket! Solid product, functioned flawlessly, settings allowed for speed ramp-up and ramp-down, working in conjunction with one of the better RC controls. I'm adding more RC "functionality" to the tank, but now the forward-reverse/L/R track movements are nearly perfect.

Simple and effective solution to a dual motorized combat robot system using two hacked 12volt cordless drill motors. Simple pin assignment to the RC controller/ transmitter receiver. In the picture, I circled the pin assignment board which has tiny toggle levers you flip kinda like a wall switch and each switch will alternate the pins going to your motor leads. This is what allowed me to give two independent rear drive motors the ability to fwd & revs independent of each other. It was trail and error then success.

I really like the ease of set up and it does make the Blizzard much more fun to drive HOWEVER....in wet snow or heavy load the ESC goes into shut down or stutters because it can't deliver enough juice to turn the motors.I can't tell if maybe I just got a bad unit. I have sent multiple emails to Dimension but I have not gotten a response.I will try calling them tomorrow as it has been a month since I sent my last email.I will continue to use it until I find something better only because I really didn't like the stock two stick controller.

This product over heats after only a few min. of use the step up sabertooth dual 25a is much better

Excellent quality esc unit for dual motor 2ch RC boat. Works with out a hitch no soldering required. Being used on EP777 28" Racing boat as a upgrade part if standard unit of EP777 shorts out. Add a futaba 2ch Attack TX with RX and works like a charm. Definitely recommend unit and seller

It's okay I guess. Customer support automatically assumes you did something wrong when the controller is pretty badly designed. Brought a cytron and had no problems

Best esc to get for custom projects . Fully tunable & programmable run your own wires . Run your motors individually