Ek Water Blocks, 1000 ml Plastic Bottle

If your worried about spilling cooling/distilled water while filling your loop? Then you should buy this and that worry will be 99% gone. Also if your using a cooling/distilled water if you spill any on your components then just dry it up the best you can and let it sit for 24hrs and as long as it wasnt powered on then it should be fine. But with a bottle like this you can control the amount of fluid and where it goes very easily

I searched various options and ended up buying this. To my surprise this water cooling filling bottle worked out excellent. All I had to do is fill it up and insert the tube to the reservoir and squeeze. The long tube make it easy to get to my reservoir and didn't struggle with it. I didn't have to worry about squeezing air either because the tube curls at the bottom of the bottle.

So there isnt much to say about this filling bottle. The spot is actually extendable and retractable so you can have a really long spout or a really short spout. The one issue that ive found is that dispensing end of the spout will actually let out a little dribble when you finish dispensing the water. So be careful moving the filling bottle over your components when you are finished filling your reservoir because there will be a little dribble out of the spout.

I got this and began to use it with the tight nozzle. I ended up being upset and cutting the nozzle off. Turns out, you can pull out the fine nozzle and it flows fast enough to keep your pump full while filling. Don't be me, don't cut it. Grab a pair of needle nose pliers and pull out the fine tip.

The fill bottle works great for filling the reservoir in the tight recessed corner of my tiny case. I ended up cutting the tip back some for more flow. My hand would cramp up from squeezing before the res was 1/4 full. It seems to be anti-drip (more or less) which is nice. You really cant be too careful when it comes to water and expensive electronics.

Not much to say but it does what it's supposed to. I did cut the tip off so I can fill faster. With the tip it takes fooooorever and it's to prevent drips but I have towels down when I fill anyways so I'm not worried.

simplifies filling the computer reservoir

Greatly helps the filling process. Delivery was as promised.

Fait son job mais quel prix pour une si simple bouteille en plastique ...

Una forma de fácil y comoda de llenar y limpiar componentes de refrigeración líquida.

Parfait.

Halt eine gute und an den Übergängen dichte Flasche

Did the job. Awkward go reach fill port and this made it a simple job. Not sure what I would have done without it to be honest. Definitely recommended.