HisencnReplacement Parts for Kitchen Aid 720-0733 720-0733A 720-0954, Grill Parts for Kitchenaid 4 Burner 740-0781 740-0780 720-0745 720-0745b Gas Grill Burner, Heat Plate and Igniter Electrode Kit

Arrived in good order and once installed, fits and works perfectly.

I have a 7-8 year old Kitchen Aid BBQ. All the guts inside were corroded and junk. Started looking at new BBQs, then came across this replacement kit. Installation was pretty straight forward, only thing that gave me a problem was some deterioration of other pieces. The ignitor cables were almost too long but long is better than short. Maybe hit the hardware store for new clips, the ones that hold the burners in. I was shocked that it fired right up with no issues.

Update 2/25: Reporting back after 1 year of use. Sad news, several of the burner tubes have just rusted out. Starting a time or two ago, I notice one of the burners had a big jet of flame coming out near the end. Last night I grilled and two of the burners basically had blowouts. I think my OEM burners lasted 4 or 5 years, so a little disappointed in these. It was good while it lasted, but I'm going to look for a different replacement set with hopefully a little better durability.Original Review:The setting: I have a Kitchen Aide 720-0954G that is several years. The heat tents began rusting out, and I decided to replace them. In the past I've cleaned the burner tubes with a wire brush when flames became uneven due to rust/corrosion buildup in the flame vents, but I decide to get this kit and replace them as well. After comparing the new burners with my existing ones, I realized that I would also need to swap out the igniters as the brackets were different on the new burners. Also, the overall length of the tubes were about the same, but my original burners had maybe a 1/2 inch more vent holes overall. Not an issue, but just noted a little variation. The install: I removed the old parts and did a thorough cleaning of the grill. The fasteners for the rear supports of the burner tubes had rusted out. It wasn't a big issue with the old burners, but these new ones would sit too low in the back of the grill. I decided to add a bar (some scape metal) for the burners to rest upon. I think someone mentioned doing this in another review. You can see the white bar in the pictures. I then fished the ignitor wires through the holes and attached them to the control. The road test: I turned on the gas and attempted to light. The ignitors were sparking, but the burners did not want to light. After a few seconds one did light, but others would not. I could smell the propane. I used pliers to tweak the position of the ignitor electrode. This did the trick. All of the burners quickly lit in the first second or two. I added the heat tents which fit perfect and placed the grill grates. Conclusion: I would recommend the kit, but removed one star for not being an exact swap out. Also, the instructions weren't great, but if you are handy, it's pretty intuitive.

The grill is now good as new for a fraction of the price

Packaged great. Great quality feel on everything. Flavor bars fit perfect. The issue I had, was with the burners. These fit both Nexgrill and Kitchen aid. I have a Kitchen aid, the part that goes on the manifold side is not real easy to get over the orifice because of the shape. Originals are round end, these are basically flat with a little hole in the center. That made it a bit tricky. The end of the burner is bent up on the side that is supposed to clip in with a cotter pin. Well the bend is the wrong way and now I can’t clip it in anymore. Not a big deal to me because I don’t move the grill all over the place. You could put with the bend facing up and it will work, but you’re gonna have a hot spot in 1 place because there are a set of holes drilled across the burner for what is I’m assuming, like a excess propane relief. All in all, for $30 you can’t beat it. My grill is 10years old so I’m just trying to keep it alive since the shell of the grill is still pretty much great.If you’re just changing the burners and flavor bars it will take you about 10 minutes. I didn’t install the new spark igniters because mine work fine.

These work and look great to give new life to my grill. Pretty easy to install.

Easy to install and works perfect!

Slightly shorter burners but it fits. the stainless steel thickness is very thin and lighter than the original burners. I used it once, I have since replaced it with the OEM burners