CableMod Vertical PCI-e Bracket (Black, HDMI + DisplayPort)

It’s perfect. It functions, looks, and was designed perfectly. Not only does this allow the GPU to breathe better than traditional vertical mounts, but it also seems to really center the card in the middle of the case.It’s extremely sturdy (as long as you tighten it down properly), does not sag, and includes everything required to mount your GPU. This was the final touch I needed to finish my system.Pictured is my ASUS ROG Strix 2080 Ti mounted on my NZXT H710 case.

The media could not be loaded. Wanted to upgrade my pc and gpu to vertical and looked for awhile to find a good bracket to fit in my case.. I have a Corsair 5000d which has a placement for a vertical mounting but didn’t like how close it made my gpu to the glass panel, and alot of brackets I seen made it sit to close so until I came according this one which fit perfectly the way I wanted. Installation was tricky only cause I had to work around my cpu cooler hose but once I figured out the easiest way around it rear was a cake walk. Really happy with this bracket and recommend it

1st one sold as new. box was already opened. plastic latch damaged. returned.replacement was sealed in box. working just fine. bit stiff, made me concerned I was going to damage it. you can tell the latches on these are fragile. recommend an ultra low profile screw driver or very small handle screw driver to fasten below that latch.works fine on my EVGA 3080ti FTW3. just had to make sure i installed the riser cable where the PCB on the 90 degree side was mounted on top of the bottom bracket of my cablemod vertical mount. NOT from underneath. I know it doesn't look good but once everything is installed you can't see it.

Everything about this product matched or exceeded my expectations. It mounted in my case perfectly without any modifications. My video card is placed well back form the side panel to provide enough breathing room for good cooling. The only downside is that I can no longer use the other pci-e slots.

Pros:- Very sturdy.- Does not require you to mod your case.- Painted matte black to match most quality cases.- Looks good if your case is long enough to support the combined length of the bracket and your GPU.Cons:- I started getting random BSODs of all kinds about a year after installation. Took me a while to narrow it down to a faulty PCIe riser cable. You would think it would last longer, but apparently CableMod source their risers from the lowest bidder.- The warranty period is only 6 months long. That should have been a clear indicator of the quality of this product, but I somehow missed it.- Very bulky, may interfere with bottom intake fans and adds a solid inch and a half to the total GPU length, so check your case GPU clearance, especially if you have a front radiator and/or a compact case.- Installation is not straight-forward and requires consulting the online manual.- Routing the display cable through the extension slots at the back of the case is a pain, which you need to do every time you want to take your GPU out.Give this one a hard pass unless you plan on re-purchasing it every year.

There were pros and cons. Unfortunately this item did not work for my build.As seen in the photo, I have bottom case fans, and this did not play well with that.Pros:Mount is thick.The mount also gives you the option to use the bottom support of the bracket instead of forcing you to. The bottom bracket has holes for better airflow, I wish all GPU mounts had holes.Cons:The mount is too bulky and pushed forward, causing the issue of not being able to use with bottom case fans, meaning at minimum you would have to remove one fan.The bottom bracket sits to low on the mount so even if you do remove one fan, the bracket isn’t high enough to sit atop the other to fans.The bracket itself being optional, is held in by two small screws causing GPU sag if you use it.Conclusion:I have a Lian Li O-11 Dynamic case which is made for max airflow, hence why you want 3 fans at the bottom. Most likely your bottom fans are RGB meaning you spent a pretty penny on them and don’t want to have to remove any, not only for airflow but also aesthetic purposes. This mount does NOT work well with Lian Li O-11 Dynamic if you are using 3 bottom case fans, thus I had to refund this item.Side note:If you are like me, using this case with 9 total fans, and want a vertical GPU, go for the Phanteks Veritcal GPU mount. It’s smaller, sturdy, no sag, work with this case AND bottom case fans, and half the cost. Also sold here on Amazon.

The media could not be loaded. Pros:This product is as advertised. It fit perfectly into my Enthoo Evolve X with my Aorus 2080 GPU.Installation was quick and simpleKeeps GPU away from case side unlike other vertical mount optionsCons:It's a bit pricey for a bit of metal and a PCI riser cableYou have to use a website for instructions.

This bracket is too tall to use with bottom fans. Requires cutting off part of back upright to move up one slot. It moves GPU about 3 cm to the right which centers GPU better in case, but requires twisting of Pcie riser cable which can cause issues. If your going for a verticle mount for esthetics, don't bother!!!!! This is frought with technical issues!!!!!!!!!!

My case is the NZXT 510.  I bought this kit because it mounts my gpu as far back from the glass to give maximum airflow with this case.  Bracket quality is thick steel with a flat black powder coat finish.  Instructions are online only and pictures are of an older version of the product, but still very easy to follow.  There is one hdmi extension with the special angle plugin to the card.  The DP cable however is NOT an extension but an actual 8ft cable, the cables are of the best quality as well.  Installation is easy just remember to not aggressively bend the supplied riser cable.  Once assembled and screwed into place the card is solid and will not move or sag.----Things to think about before buying this product ----Be aware of the install and the type of card you are using.  The kit will extend about an inch and a half to the length of the card installed due to the cage that holds the special cables, so check to see how much space you have to make sure it will fit in your case.This product takes up SEVEN slots in the case, and with my case that is all of my slots!  If you have any PCI-e cards ie. sound card, capture card, streaming card, or dual gpu's this will NOT work.Overall, expectations all met and shipping was super fast. Pictures attached to show what I am babbling about.

Pas encore monté j'attends ma rx6800xt ouais ça ma l'air d'être au top de bonne qualité le support est gris français non noir mais ça passe crème dans une conffig black.

Took me around 15 minutes to install. Overall pretty easy although bending the PCI-e extender felt ugly - with the card being set further into the case at rear and side, the PCI-e ports are not aligned.I realise it seems expensive, but you get what you pay for. The materials and finishing are good, you get a PCI extender (generally not cheap) and a custom DP and HDMI cable. I think the price is reasonable.The major plus for me was the drop in GPU temps. At heavy load it's come down 10+ degrees, so now I can play games without opening the case side panel! Good times.

The media could not be loaded. Bei der Cablemod Grafikkartenhalterung handelt es sich um ein schönes Gimmick, mit dem man seinen PC optisch aufwerten kann. Dementsprechend muss jeder selbst wissen, ob er/ sie es braucht und dafür Geld ausgeben möchte. Falls ja, halte ich den Preis von 60€ angesichts der guten Verarbeitung und Qualität sowie des Lieferumfangs inkl. HDMI- und DisplayPort-Kabel für fair und angebracht.Der Einbau ist etwas tricky, aber ohne allzu großen Zeitaufwand gut machbar. Eine bebilderte Anleitung gibt es auf der Cablemod-Website.3 Tipps zum Einbau: Als erstes die mitgelieferten 45°-Kabel durch die Gehäuserückseite nach außen führen, damit erspart man sich später die Fummelei. Die Halterung zunächst ohne aufgesteckte Grafikkarte einbauen, dadurch lassen sich die Slots im Gehäuse besser "anvisieren" und man muss nicht blind herumstochern. Dann das/ die HDMI-/ DisplayPort-Kabel bereits in die Grafikkarte stecken und diese erst danach auf die GPU-Halterung aufstecken. Auch das erspart unnötige Fummelei.Abschließend lässt sich sagen, dass der Vorteil dieses Produkts darin liegt, dass die Grafikkarte nicht wie beim vertikalen Gehäuseslot (falls vorhanden) direkt an der Glasscheibe klebt, sondern weiter mittig verlagert ist und somit eine bessere Luftzirkulation stattfinden kann. Nach dem Einbau liegt meine GPU-Temperatur im Schnitt nur ca. 2-3°C höher als vor dem Einbau. Im Benchmark lässt sich kein relevanter Leistungsunterschied erkennen. Ruckler im Spiel habe ich noch nicht erlebt, falls sich dies ändert, passe ich die Rezension an.

Se volete montare una scheda video in verticale e non farla surriscaldare questo kit di Cablemod fa per voi. Zero perdita di prestazioni, sostiene la scheda video, sta drittissima.