Cold Steel Bird & Game 3.5" Lightweight Durable Japanese AUS8A Stainless Steel Fixed Blade Drop Point Outdoor Hunting Neck Knife, Resistant Secure-Ex Sheath

The knife arrived quickly and according to the Amazon shipping schedule. True to most all Cold Steel products, it was well made and visually pleasing. The blade is full tang and of decent length, sharp out if the box, and the hole on the end of the grip gives you a very secure way of retaining and controlling the blade which is important because of the extremely thin profile of the handle. This all factors into the very light weight of the knife and makes it, along with the low price, for me, the perfect neck knife. I have attached a length if 550 cord with adjustable knots to enable me to wear it comfortably. The steel of the knife retains a decent edge which is very easy to maintain. Finally, the light weight and thin profile of the sheath and knife together makes it very easy to conceal. Once you put it on it is barely noticeable, to you or anyone else. Recommended

Exactly what I was hoping for! The steel type could be better, but I’m not complaining for the price. So you have to touch it up more often to keep it razor sharp. Overall great quality, as are most products from the Cold Steel brand. My only knock against it is the sheath. It’s pretty basic and you have to depress a small plastic tab to remove the knife. This makes it more difficult to draw smoothly when working, so I used a dremel to adjust its attitude. The pinky ring is what makes this knife so good. You can hang it from your finger while you work with your hands, and flip it up when cutting. So convenient! Simple design, nothing fancy, does what you need it to do.

I just received this knife in the mail yesterday December 4th 2023, and I have to say I'm very impressed so far, if anything changes, I'll come back and update. I wrapped the handle in paracord because the scales are just glued on, should help keep them on for longer, I also filed down the holding tab to make it easier to pull out while still leaving enough to keep it secure. This knife is a wonderful lightweight edc knife, it's ring and sheath make it tactical, while also being useful for hunting/food preparation.

Handy size knife.. fits well in a front pocket.. I put grip tape on the handle and melted paracord around the finger ring. I honed it to make it a bit sharper than it arrived but I don't mind that. The sheath is cheap plastic.. retains ok but rattles and is not easy to mont a clip. With a combo of grip and duct tape I mostly resolved the rattle . Ideally this would have a clip or angled horn that would allow you to slip it in your front pocket and when the blade is pulled the clip would catch on the pocket leading to quick deployment. This would have been super easy and cheap to mold and would have made this a bigger hit. Overall I'm happy with the blade and have rigged the sheath to be acceptable for now. Update : This has grown on me. With some tweaks its a near perfect edc fixed blade. Its probably my favorite. I add a alligator clips fixed to some wire and clipped inside my pocket so when you pull it the sheath gives way. Takes a ripping sharp edge.. Just do it.

Update!: this knife is no longer made in Japan. Very disappointed with cold steel. This is a piece of beautiful Japanese cutlery. It’s a very simple design but extremely functional. The aus 8a blade steel is easy to sharpen and takes a razor edge. It’s bigger than it seems but not overly bulky. The sheath is sleek, just like the knife, and adds to its design. The two small holes on the top of the sheath are a bit smaller than the holes on the Cold Steel bird and trout so a chain necklace won’t fit through. That’s most likely the reason it did not come with a chain. The knife can be held in many different positions. The sheath does not come with a mounting point, but cold steel makes good C clip that can be bought separately. This knife really is versatile. The blade thickness and geometry make it good for any task.

The one I received was made in China, not Japan. Still marked as AUS8. Its a great little knife, minimalist style, with the ring and jimping gave the pencil thin handle good grip with great control. Arrived decently sharp. Plan to use it to gut fish, put on a 17 degrees edge for filet. It felt the steel is authentic, it took a bit more effort than kitchen knives to sharpen like other AUS8. BUT the issue starts, the edge does not stay sharp, sitting in the sheath and it gets dull! I suspect this is largely due to the sheath design and position, plus the index/pinky finger release that secures the blade. (Deploy using index/pinky release is awkward and require practice). The sheath audibly rattles if you shake it, but wearing it as a neck knife makes no sound. With a bit more force, you can draw the blade without pressing the release. However, not sure if it was resulted with these testing, the edge had not burred, but micro rolled. Took significant stropping effort to remove the roll. For small blade like this, missing the crucial cooling time during heat treat can lead to this and its quite common among affordable knives. Re-profiled it again to remove potential soft edge material. Within two cuts of cardboard and practicing the draw (best two handed, if you use a neck lanyard the sheath tend to bounce back and hit you in the face if you yank it, nerveless fish juice mist your shirt. ) It rolled again!! Although I can not confirm nor visually ID the sheath wear, but I suspect the sheath contacted the edge and rapid deployment dulls the edge quickly. Still, a great blade for its price. Could use a custom kydex sheath. I noticed most reviews with low stars tends to be the batch that were made in China. Can't speak for those that were made in Japan, but they seem happier than I do. Lastly, pocket/belt carry with Ulticlip's UltiTuck does fit, but it makes the pencil handle ring sticks out like a sore thumb. It require a bit more effort to conceal. Unless you make a custom sheath, it takes practice to draw the blade without drawing covering garment stuck with the ring. Still, a good knife to have, turning it into a project knife. Going to re-profile it to 20 degrees and hope this was my human error and not Cold Steel's heat treat issue with their new contractor. Wear it as a neck knife and pull out ~ gently!. Enough likes I will post an update.

This is a decent knife that is easy to turn into a convex edge, with a belt sander.

This knife is very lightweight. It does not come with any sort of belt clip for the sheath. There are just holes to rig your own mounting system with paracord or string. The sheath has an always press tab that sits at the bottom of the blade and makes me horribly nervous to press when I draw it. It can also quite easily be ripped from the sheath. The crown jewel of negativity lies on the sharpness. I have bought ALOT of cold steel products over the years. I JUST Got an SRK that was AMAZINGLY sharp right out of the box & that may have been 2 months ago. THIS KNIFE WAS VIOLENTLY DULL. Absolutely absurd. Returning.

Scales came off in 5 minutes of light use

El cuchillo es de buena calidad, resistente, fino y afilado. Toma en cuenta que no es una herramienta de trabajo, si no más bien un objeto de defensa personal. Es ligero, resistente y el aro o anillo te permite manipular la navaja con presión y seguridad.

Picked this up on sale and was very happy. Wanted a ring style blade and this fit the bill quality and price wise. Handle is a little tiny in hand but not terrible. Some paracord wrap should help as well. Wish the sheath was a bit more substantial but the size of blade doesn’t require it. Would recommend.

Mooi mes

Un cuchillo muy sólido, la funda va muy bien, y el filo que trae es excelente, fue una buena adquisición