Tyger Auto Fender Flare Compatible with 2014-2018 Chevy Silverado 1500; 2015-2019 2500 3500HD 6.5' & 8' Bed, Fine-Textured Black Paintable Factory Style 6pc | TG-FF6C4368

These looks and fit really well on a 2016 Silverado 2500hd. I am very pleased with them. They cover up to the fist body line crease over the wheels. They cover, but don’t look too big. They also do not cover the 4x4 stickers. They seem very durable, and a little pliable. They say to leave them in the hot sun if they need to be formed a little bit. I did not have to do that at all. There are 2 tiny little gaps on the rear wheels, but not a big deal for a 10 year old truck. They are perfect to cover up minor wheel arch rust. I also think they make the truck look great. I think they should have been on from day one. These fender flares fit nice and are very easy to install. They use some of the original holes, and some of the holes you will need to drill. I did not have much metal to drill into on the very top and these still fit fine. Overall a great value to make the fenders look great. These flares also come with the needed hardware. You also get little extensions to make them a little longer flares for a 1500 truck. The 2500 does not need the flare extension. I did have to remove the mud flaps to put these on. You could put the mud flaps on over these, but the mud flaps would probably not fit very well.

For me on my 2016 Chevy Silverado the instructions didn't work great (moving the hole over 10 mm I tried this but there was still a big gap on both corners). What I did is anchor the bottom holes on each side leaving them loose, then the critical one was the next one up moving up the inside of the wheel well. I pushed the super hard until there was no space on the corner and screwed that anchor point down. Then I went over to the other side pushed super hard on that corner till there was no gap on the corner and screwed that one down after the two top sides were securely anchored. I just went around and screwed the other holes wherever they were sitting. Installation came out great almost no gap on the corners.

Got this installed on my son‘s 2017 Silverado, but the instructions were wrong in several places. First of all, making the marks and then measuring in 10 mm to drill the pilot holes was completely wrong. First, there’s no way for the holes in the product would line up 10 mm in so I just had to use the self tapping screws to screw them in and it fit perfectly. Second measuring 10 mm in from where the holes were in the rear wheel wells, there was no metal to screw into so that was impossible. Secondarily, For some of the holes in the product connecting to the wheel. Well, there was no screw hole so I just had to create one using a self tapping screw. So if you generally follow the instructions and just push in on each piece and screw them in place, which is what I did on the remaining three wheel wells, it takes a fraction of the time that the first wheel well took because of the poor instructions. So clearly the instructions were from a different model year even though they say it applied to a 2017. But, all in all they were very simple to install, they’ve been on for several weeks now and they fit very tight with no slack, they look great, they’ve been through the car wash without any issue and it’s a mechanical car wash. That cost a heck of a lot less than some of the other ones so all in all I highly recommend them.

Haven't installed yet but they look great out of the box

Great looking fender flares! Excellent quality. They do require some drilling on the truck body but if you're skilled for that type of installation you will be very happy with the results!!! Would highly recommend!

The product instructions are easy to install. But the fender flares do not conform to the body after installed and a few hours in heat like they state in instructions. Been over a week and still not conforming to body ( 3 out of 4). Flares are ok , if had another chance I would just with the bolt around outside edge instead of these.

They turned out with a nice look, the fitment wasn't bad just slight modifications.

these look pretty nice but even with adding trim theres still huge gaps kind of defeating my purpose to adding them in the first place any tips or tricks to fix that?

These fit my 2015 Silverado 1500 crew cab perfectly. I had to remove my factory mud-flaps/splash guards but could use some of those existing holes to attach the flares, I had to drill roughly 5 new holes for each flare which I expected. I greased the holes to prevent rust in the future. Love the look and ease of install. Recommend them.

Facile à installer, j'ai du ajouter quelques vis afin que l'ajustement soit parfait, très satisfait

They seem like a good quality, good fitting product. I did buy the fender flare rubber gasket for the install. I also had to add two self tappers to each flare on the corners. I found by taking your time and pushing in and making sure it fit right as you went helped. I also upgraded the hardware to black stainless self taping screws.

Hides the rust. Fits great

front fit great rears not so good