⚙️ Elevate Your Efficiency with Every Charge!
The CBB60 Run Capacitor is a high-performance component featuring an 80uF capacitance and a robust 450V AC rating, designed for versatility and reliability in various electrical applications. With a ±5% tolerance and UL listing, this capacitor ensures safety and precision, making it an essential choice for professionals seeking quality and performance.
S**K
Great source, fast response and ship
This particular capacitor is very hard to find, but I found it here. Works perfect as it should.
N**T
Bolted right on
Put on a free air compressor that was in the trash.
J**N
Amazon Prime to the rescue!
Replaced the start capacitor on my Rigid jobsite air compressor. Fit perfectly and worked great! Super fast shipping. Only down for one day!
D**N
"NOT a motor capacitor"
This cap looks great with extra thick connector studs. The studs are great current carriers even if they are too thick for standard cap (capacitor) slide on quick disconnects. Even so they are threaded for machine screws. (Good luck finding the fit). BUT fuse plug, I mean wires connected to the studs appear to be 18 or 20 gauge wire. Why they used the more expensive 30 amp studs connecting 5 or less amp conductors is beyond me. This cap lasted less than 3 hours before blowing the stud and then spewing paraffin on the windings of my motor. This is a lab cap to be used only in perfect conditions not real life. I recommend this capacitor for 2 amp motors.Use spec's- 120 volt, 2.25 hp, 14 ampover 40 years power plant electrician specializing in AC/DC UPS, communications and HVAC. All heavy capacitor usage.
R**C
Pressure washer
I used it in pressure washer, it is running without issues
T**M
Fixed up a hand me down ridgid air compressor, cranked right up !
Easy to install, works great !
B**.
Capacitor does the job
Using the same identity numbers of the failed capacitor this item healed the air compressor to be functional again.
V**V
Terrible quality!
1st - the 45mm diameter fits the holder perfectly, but on the wrong end. The end that i need (with the pins) = about 4 mm larger in so I have to tape it on. Not happy, but it’s okay. We can make it work.2nd - The 1/4” spade pins were so thick & weakly mounted. When I tried to push the female connector on, the pin sank in promptly & now it moves around like a loose tooth and not working. (Wouldn’t dare use it even if it still works)Kissed that goodbye! + The siding 1/2 cleaned now must wait some more. Cursing in multiple languages.
Trustpilot
2 months ago
2 weeks ago