MATCC Foam Cannon II Foam Nozzle Pressure Washer Jet Wash Snow Foam Lance with 1/4" Quick Connector Foam Blaster 5 Pressure Washer Nozzle Tips for Cleaning

It is a solid made product. I wasnt expecting much to be honest. I work in a high end detail shop and we have several $100+ foam cannons and I'd say, so far, this item worked about equally as well. I have 3 uses in and so far it is decent sans a minor spot that sprays water, but it doesnt affect the performance at all. HOWEVER, there is one difference between my shop and this one. The pressure washers in our shop are over 2.1 gpm whereas my home washer is only 1.3. This product comes with a 1.2 mm orifice which does NOT work well with low flow machines (<1.7 gpm or so). I purchased a couple 1.1mm orifices from another seller on Amazon for like $7 and now this cannon works flawlessly. Using Chemical Guys Honeydew Snow Foam soap with

It is a WONDERFUL SIGHT to see your car or truck 100% coated in these heavy cleansing suds! Like a heavy, warm blanket.Be sure to buy a gallon of the special soap (available here, with a gloss enhancer) “Chemical Guys #101 has a nice scent and very good cleaning with gloss enhancers to go with this “Suds Cannon!”This means that when your vehicle dries, it is left with a gloss shiny surface, “almost” as if you had waxed. Common sense states the wax like appearance will not last like a hand rubbed wax, but if you wash using the “Foam Cannon” say once a month, this gloss might easily last you this whole month!My wife is fussy about her 2002 BMW 330i. She absolutely loves the fact you do not rub the dirt into the finish. The bubbling action literally “lifts” the dirt free of the finish to rinse off with the final rinse of clear water. Leave the suds on for a few minutes to bubble. Remember to stay back far enough from your vehicle, PWers are powerful machines. The final clear water rinse can be a bit more powerful to get the glass especially nice and clean.Don’t forget all of the other uses.... your motorcycle, bicycles, RVs ATVs, grill, the soffits of your home, everything that gets dirty, can use the love of the Suds Cannon! Have at it! A clean, shiny, happy place. Safe for the kids to play around, too.God Bless All Here. Stay Safe.

The foam cannon works great but the nozzles didnt work for me. Cannon leaves a nice thick layer of foam with no problem with my 2200psi electric power washer (the one from costco).The pressure washer nozzles dont seem to work really well i compared it the the original ones that i have, the orifice on these are bigger causing the drop in pressure when i use it so its not really "power washing" im just spraying the car down with very little pressure.Great foam cannon, try something else for the nozzles.

Used the Foam Cannon to clean white vinyl siding. Attached to my 3000 psi 3 gal/min pressure washer the foam stream reached almost 25 feet up to get the highest gable ends easily. Used simple green and a small amount bleach in the dispenser bottle. Let the solution sit a few minutes then just used the empty Foam Cannon to rinse off the siding and windows. So much easier than struggling with my extension wand...used it way less! 5 stars to the Foam Cannon!! It made my day!!

FOAM GALLOR! Better than many of the other overpriced products. I use Chemical Guys soaps and just 2-3oz is enough to foam my full sized sedan and 3 row suv several times overs. Nozzles are an added bonus.

Other brands simply looked cheaply made. Withstood my 3000PSI machine just fine. Plenty of adjustments for as little or as much foam action that you desire.

I fill it about a third to half way with soap, fiddle with the knob and nozzle, and foam eventually comes out. It would be nice if it came with better instructions, but it's not that complicated and you eventually "get it."

This is a high quality foam cannon. It shoots a lot of heavy thick foam. It covers my whole car with soap. I highly recommend for anyone looking for a good quality wash.

La qualité de la mousse va dépendre du savon utilisé mais ça va faire de la mousse quand même.De la voiture au lavage de vos vitres de maison ça fonctionne super!Ce n'est pas miraculeux, pour la voiture elle ne se lave pas seule mais la poussière, le sable et autres substances volatiles, c'est que ça part et donc moins de risque de grafigner la peinture de votre voiture.pour les vitre grasses, faut frotter !Bouteille rigide, pièces aussi. Combien de temps ça va marcher... on verra.

First time using a foam cannon. Used with my Sun Joe 2030 psi, 1.76. Matte liquid soap from the manufacturer which isn’t necessarily for foam cannons. Not sure if that’s a thing or not. Initial setting didn’t produce much so went to mostly (-) which resulted in the pic. Says not to go full (-).Worked fairly well I think though it did create quite a sudsy mess on the driveway. Using with an electrical power washer means that cord, the hose connecting, and the hose on the washer. Not the most convenient when manoevering around a car.Overall, will use again and the price point was good.

good quality of plastic easy to work with but i find, it for the foam those not what it show on youtube and i have a good pressure of waters and the good soap it goes with, and my pressure machine works well is it a defect i dont no but i will try more to see what is the solution before i return it, but in general material is good

I initially was disappointed with this product. I was using it with a Ryobi gas pressure washer with a pressure of 3100 psi. I wasn't seeing the "soap blanket" like I was expecting to cover my vehicle. I bought an 1800 psi electric pressure washer for just washing the cars (lower pressure is safer on the paint and finish). I was pleasantly surprised to find it produced much more soap foam than with the higher pressure washer. I use this with Chemical Guys maxi suds car wash and it covers my car with foam so much I can hardly see it. I barely have to use a scrub brush to get it clean.

The bottle threads is cheap plastic, the foam cannon has brass threads. it is easy to mess up the plastic bottle and mine never sealed from day 1. I returned it on the same day. The same product (rebranded) is available from my local auto parts shop (princess auto) for half the price so this is not worth it at all.