Mustee 17W, White

The tub is shiny, reinforced, heavy duty plastic. It seems quite sturdy. The bottom tilts toward the drain, so there won't be standing water in the bottom. The ledge where the faucet goes is completely level, and water can potentially drip off the sides.The dimensions provided by Mustee's documentation are accurate. There are dimples on the underside where you drill the faucet holes to help center your drill - nice touch. I found that starting a hole from underneath, then finishing from the top prevents tearout. The tub works easily with a hole saw, and even a spade bit if you have to use one.The tub can hold roughly 180 pounds of water when full, so make sure your mounting is secure. Ours is mounted to concrete block with 6 Tapcons - we didn't used the supplied bolts and inserts. The mounting bracket holes are large enough that you'll need washers under the Tapcon heads. When the plumbing is disconnected, you can lift the sink off the mounting bracket with a bit of effort.The sink was nicely packaged for shipping. You get a sturdy mounting rail, mounting hardware, a rubber stopper, and a 1 1/2" nut with tailpiece washer for the drain. The drain uses standard 1 1/2" drain fittings.

Tub came with wall mount and side brackets. Tube is thick and great quality. No cracks on my unit in shipping. Key thing to know the Side brackets attach to the bottom of the tub and are there to provide additional support and level the tub on even wall. I have an uneven wall location as the bottom wall was concrete blocks and the top was drywall with studs plus additional bottom molding I added to finish the look of my garage. I used heavy-duty shears to cut around molding and cut some of the plastic away from the wall to make it fit for my needs other wise the side plastic would cut into the drywall because of the unevenness but this was just my application and no fault of utilab. Additionally I will add a 1in thick board approximately 6 in wide to "toe nail" in to drywall transition board and offset the level difference at bottom making the sink level at the top. However the sink looks and functions well now for use. I noticed there were some areas on the inside the tub that were rough or that didn't have clear coat on them. I will also be recoating the inside with a water phobic poly-acrylic coating to fix that to prevent staining in those locations.

I had one of these mustee utility sinks in my laundry room for twenty years. I was so impressed with how it held up. I wanted to replace it with the exact same sink. This particular one was very hard to find. And none of the box stores or home improvement stores had it.This is the exact sink I needed, and i'm certain it will be good for at least another twenty years! Great cost too!

The first one I received was cracked. Returned. 2nd one was fine. Easy install

We had to order this sink twice. The first time it came with no brackets or hardware. We ordered a replacement. The second time it came, there was STILL not hardware or brackets AND it was broken in two places. What a hassle and very disappointing.

Nice, deep sink without legs. Plenty of space below for a trash bin, etc... Wall mounted with metal brackets to easily install. The color is a very slight grey with speckles, for a nice effect. (I prefer this to as stark white color). Inside (closest to user) has a slightly slanted wall with grids for washing clothes if needed.

This Mustee product is a high quality and attractive tub for utility and laundry rooms; however, it does not match the wall mountings of the laundry room tub that I intended to replace. I ordered and purchased this tub from Amazon. The tub was shipped to my residence by a third-party vendor.The Amazon return process went amazingly well – up to a point. The third-party vendor quickly approved my return, providing that I pay return postage. My original payment to Amazon for the tub, including state sales tax, was about $165.00. Return postage to the third-party hawker was quoted by UPS at $188.00.

I bought this laundry tub to replace an old rusted cabinet style laundry tub. I wanted something that was up off the floor that I could clean under. This tub is incredibly sturdy. I used my laser level to insure it was level and fastened the brackets with falcons into my cinderblock wall. The tub looks great! It’s extremely sturdy. I use a 1 1/2 inch hole saw to cut holes for my faucet. This laundry tub is made of strong plastic. Would absolutely recommend without hesitation.