PPD Printable Vinyl Sticker Paper for Inkjet Printer, Matte Sticker Paper 8.5 x 11, Self-Adhesive Print Your Own Stickers at Home, Custom Photo, Waterproof & Tear Resistant, Instant Dry (20 Sheets)

My stickers turned out great. I decided to test one for water resistance and it smudged when rubbed with a damp cloth. I like the stickers anyway, but will avoid getting them wet. I just used an HP inkjet printer and was surprised at the quality of the stickers.

Works well in inkjet Cannon printer -- It is made to be set under the High Resolution Print option so your images don't turn out streaky.

I love that the backing of this paper has an almost plasticy coating to it. It makes the stickers feel very high quality and they don't stick too hard to my cutting mat, which makes removing them after cutting a breeze. The cost is a little more than other vinyl sticker paper on Amazon, but the quality is worth the small increase in price. I just wish I could get larger packs!

A lot of reviews stating it is not water proof. On this Amazon listing, it doesn't say waterproof at the time of this writing. The detailed description does, however, state it is water resistant, under "features." ('The PPD Glossy and Matt Vinyl papers are water resistant') I am not sure what they consider resistant, but under a few drops of water, the ink starts to run. (print was left to dry 10 minutes before testing) [Please see attached photo]Furthermore, the next bullet point states "To create 100% waterproof stickers, view our range of Fixative Sprays."The included instructions state to print on the best quality your printer can handle. It also says that old printers may not handle this paper. Let me quote from those instructions:"Store paper flat in original packaging to avoid exposure to humidity and dirt. Keep away from direct sunlight and at room temperature. Printing set up instructions are provided as a guideline. Final results depend on the type of ink used and whether original or compatible. Some adjustment might be required to the printer driver in order to get the optimal results. In the very unlikely event that media does not feed in the printer, a gentle push as the printer attempts to pick up the paper might assist in feeding. Worn and contaminated feeding rollers on older printers may also effect feeding. Rollers can be cleaned with acetone or alcohol to improve the feeding of paper."(This quote is verbatim; I did not correct grammar, spelling or edit in any way)The above states in lesser words, that OEM inks may print better than 3rd party inks. Keep this in mind. I use refillable ink from a 3rd party, and my image was crisp, clear, and vibrant. [Canon Pro 100]Anyhow, I would think that for paper that is advertised to be usable on a vehicle, would indicate that it is weather proof, and car wash proof. But I would be wrong.- David Ochoa(using brother-in-law's account)

The media could not be loaded.  I started to ordered this paper with Avery Self-Adhesive Laminating Sheets to make them more Water and Weather Resistant instead of purchasing AIVA Paper Group Matte sticker paper, which at one point was costing the same amount to get this Vinyl Matte Sticker Paper and the Avery Laminating sheets.When Printing, I use my Epson Ecotank Photo Et-8550 using the rear feeder rather than putting it in the paper tray below so it wouldn't bend, crumple, skew, or just be ruined. I would HIGHLY RECOMMEND to check if your printer can handle this paper before making the purchase.I use the paper with my Cricut Explore Air 2, and because of the laminating making the paper reflective, the censor can have a bit of trouble picking up the guidelines. I set my printer to high quality and put some Matte tape over the guidelines and to take care of this. Because High Quality uses more ink to make the design look it's best, after printing I let the PPD Sticker paper dry between 5 minutes to even 2 hours before laminating mattering on the design.I will say, when setting it up with your Cricut, this paper can take some messing around with, so be prepared to lose a couple sheets while getting setup for the first time, because this is Laminated Vinyl, I set the pressure to Poster Board + to cut ALL the way through the sheet to get die cut stickers. You may have to do some more testing for yourself if you do not laminate the paper.Overall I am immensely satisfied, My customers have been immensely satisfied, and I will be purchasing more PPD Matte Self-Adhesive Vinyl Sticker Paper in the near future!

I have a Canon printer, model TS6400. The color from this vinyl paper and printer are bright and vibrant. At first I thought the stickers were great! But after I let the stickers sit for 10 hours, I went to cut them out and I noticed the ink was coming off the paper and sticking to my fingers. Maybe I didn’t have the right ink for his paper, maybe I didn’t let it sit long enough, I don’t know. But the ink was just coming straight off.Adhesion is great!Color is great!Ink does not stick!Stickers are not waterproof

Finally, a glossy vinyl sticker paper that’s water proof without laminating

Debo admitir que tenía algo de miedo que fuera a quedar un resultado de baja calidad, pero no fue así. Los colores quedan muy bien, la aplicación es sencilla y sorprendentemente rápida, y duran hasta 48 hrs puestos sin problemas... Sin duda volveré a comprarlo

I make scale farm models and I have been looking for a material to print decals for them. I did not want the expense of buying waterslide decals so have been looking for sticker paper. I had a file set up with color corrected image ready to print. I used the setting recommend by the manufacturer - premium glossy - high quality. I used a higher end Epson ink jet photo printer. I found the colors to be very accurate. The sticker is thin enough to not be too obvious on the models. I had to reposition one of the stickers and used a sharp hobby knife to lift the edge and reposition. It still stuck back on easily.

My stickers turned out wonderfully and is a nice affordable option for some print and cut stickers made at home! I will be definitely be ordering again! (:

I love this sticker paper and thought the colours came out beautifully on it! The backing is also pretty thick which makes it feel super high quality and premium. I had some issues finding the right setting for my cricut initially but it all worked out! It turns out that after laminating, I have to use the Foil Poster Board setting which makes it cut all the way through!The online other thing is that while the paper is waterproof, the ink on my inkjet printer I use isn’t. So even after laminating, water can seep through the sides and make my stickers bleed. But that is still something I am figuring out and I don’t think it had anything to do with the paper. Overall, great sticker paper and the best value too! I hope PPD never changes the backing paper on this!!!

This paper is so high-quality. I use it for my sticker shop (Macrado shop on Etsy) and people love it so far. No smudges, instant dry, and I don’t know if it’s mentioned in the description but it’s waterproof. I had to try it myself because no one else had mentioned it and I needed to know before I started selling them.