1 qt Minwax 61395 Classic Black PolyShades Wood Stain And Polyurethane, Satin

Goes on easily and flows smoothly as it dries.

Excellent product, well satisfied with delivery and quality, will buy again!

Restored weathered chairs to new.

I like it I hate it. First off make sure you mix it. I started using it without mixing it and it did apply as a varnish but as I got closer to the bottom the color got darker and darker. Also, I will note that I thought I bought a pint for $20. I must have misread it and bought a half pint, that's on me. If I would have went to Home Depot, which I don't always consider affordable, the half pint would have been eight or nine dollars, so this is 100% plus markup. It may be worth it for convenience though. Oh and on drawing time, it takes hours upon hours. Easily four to six. And naturally there is a pretty strong smell for days.

If people purchasing this finish would keep that in mind, and follow the instructions on the can, most of the issues leading to bad reviews could be avoided. This wood finish product is not a stain, it is a tinted transparent polyurethane coat. Don't brush it on and try to wipe it off as you would a stain. It is not a stain. Don't expect it to penetrate bare wood in the way a stain does. It is not a stain. Do treat it as a varnish or polyurethane type of finish for the surface of wood. Use thin coats. Let it dry COMPLETELY before applying another coat. Sand lightly between coats if needed, especially if there are drips. Work fairly quickly and lightly brush the whole surface to even out a coat before letting it dry. If you're starting with bare wood, use a wood sealer first, or use a regular stain and clear coat instead of this product. The best use of this product is to change the color of finished wood without having to sand off the old finish completely. It will make a light color darker, but it will not make a dark color lighter, though the red-toned or yellow-toned colors can warm up a darker wood finish.I bought this because I'm in the midst of painting a spare bedroom. The closet doors date to when the house was built in the 70s. Their thin factory spray-on finish was looking dull and worn out, and the dark color was dated. The doors bore dings of hard use by kids and the finish had been marred by past by naughty male cats with territorial issues. I didn't have the budget to replace them, and while I thought about painting them white, I'd have to use primer and many coats, and do the rest of the woodwork to match, and that just didn't fit my timeline for having this done (though it's not out of the question for the future). All I wanted was something to freshen the color and brighten the finish. This product looked like just the thing. I chose the chestnut shade to add warmth to the dull dark wood. After sanding, I applied this with a disposable sponge brush. The directions on the can recommend a natural bristle brush, and that might work even better, but the sponge brush worked well enough. The closet doors took two coats. The bedroom door, which was in much better shape, looked great after one thin coat. The baseboards and window moulding took one coat, and the windowsill, which was weatherbeaten and bore lots of scratch marks, took considerable sanding and several coats to get a good finish. The result is woodwork with a nicer color and a fresh new shine. This is exactly the kind of thing this product is for, and it did the job very well.BE SURE TO VENTILATE THE ROOM WELL. This stuff is VERY fumy. I took the screen out of the window and put a large box fan in the window while I worked, which was adequate, but I still worked quickly and left the door to the room shut while the finish dried. Also, keep pets and small kids out of the room while the finish dries! Not only could the fumes be bad for them, but the finish will be sticky for at least five hours, and you don't want small handprints or clumps of pet fur marring your finish.

The product is great . It’s the second Time i bought it. The quality is really goodThe package arrived damaged, because the packaging wasn’t really great , the can was moving in the box 😩

i was a bit disappointed in the quality of seal and also the color added which was a bit more than expected

It takes time to match the old wood with the new. After a few attempts with stain, I lightly sanded and began putting on a coat of this polyurethane/satin combination. After the second coat the finish color really came together and looked so good that I could not resist on final light coat to protect. It looks great! This color worked to match old interior golden oak that had darkened with time. My only negative comment has nothing to do with the product, but the can that I received was completely rusted on the outside and bottom of the can....I will pour it into a clean empty to preserve. This reflects did not affect the product, which worked beautifully with a little patience.