Replacement for Samsung Washer Bearing and Seal Kit Fit For Samsung DC97-17004A DC97-17004B DC97-17004E DC97-17040B DC62-00156A DC97-19636A WF393 WF395 WF24H WF405 WF42H 6601-002637 6601-000148

The 8 year old bearings in my Samsung washer seemed to be in decent shape for their age but they were definitely not as silky smooth as these new bearings.These new bearings were an exact fit and I had no issue installing them in the back side of the washer drum.Be sure to use a piece of wood to gently and evenly tap the near bearings into place. You can lightly lubricate the bearings with some silicone grease to help ease them into place.Another tip I read was to place the new bearings in the freezer for a few hours to make the metal contract just slightly. This makes them even easier to install. Just take your time and don't rush the process.I'm very happy to report that after replacing the bearings along with the spider arm assembly and the four shock absorbers, my washer will now complete a high speed spin cycle for most loads.We should be able to get at least a few more years of use out of the washer.My 2015 model year Samsung washer model number is WF42H5200AP/A2.

This product seemed very good at first the seal fit very well and bearings appeared to be a good quality. Fast forward 10 months the loud noise of bearings going out started again.I would not advise buying this product.

Washer was violently loud, like a jet taking off when on spin cycle. If your going to do this yourself make sure you have no plans for several hrs. Installing these was easier than expected and the washer now spins like new.

I bought this not long ago and it's stopped working. Instal was was fairly easy, but went out to quicly. My washer is back to making awful noice again. Very disappointed.

Waiting on mine to arrive. I bought two sets. After reading many of the reviews, I have to say that misuse of the washing machine WILL cause premature failure to the bearings. Overloading the load will put too much stress on the bearings.

Good quality and a nice fit. I bought a tub of silicon grease as I noticed the OEM main rubber seal had it on but most of the aftermarket ones don’t.

Clean the gel out of them and repack them with actual grease! Took 2 hours to swamp them out. The seals on one bearing was rusty most likely from the water based china gel

The product seem like a good fit. Did not contain the silicone that’s recommended to go around the seal. But as I now see the warning that this product is frequently returned, my washing machine is as loud as it was before I repaired it. Now I’ll have to get a quality replacement instead of cutting corners with this product. I suggest you do not buy it.