16AWG Wire 45A Connector to DC 8mm Adapter Cable,for Solar Panel Goal Zero Yeti, 45A Connector Compatible with Anderson Powerpole - 1ft/30cm

Works great with my generator.

This WILL fit the Goal Zero, but you will have to file away some rubber ( see pictures) so the male 8mm connector can fully enter the input cavity. It's pretty soft material, so if you use a bench grinder like I did, go gently! Had to remove about 1/64" of material around the end, approximately 3/16" from the end with my bench grinder. Also, with the 8mm port there's a reduction of 180 watts instead of 220 watts you getwith the Powerwerx connector delivered to the Yeti.Now that this excess rubber is removed, the cable works fine. PLEASE NOTE: Goal Zero does NOT recommend using this to convert a high voltage and amperage charger from a Powerwerx 45 amp to a 8mm input. Your charger may have too much power and fry the built in charge controller, so check all the specs first!

It was fine. That’s me with a drone stuck in my hair.

The media could not be loaded. The barrel connector is not a good fit for my original Goal Zero Yeti 400 - it seems slightly too small so there is play in the connection - have to wiggle it to get current flow and it stops if you bump it while connected. Makes me concerned that it could short so I wouldn’t want to leave it connected unattended.

Works well, easy to use and adjust to fit your power bank. Read the instructions, they are step by step guidance to adjust from horizontal to vertical positioning of the plug.Easy to do, worth the money.