TARIONDesk Camera Mount Stand Heavy Duty Articulated Camera Arm Articulating Table Mount Camera Stand Adjustable Flexible Gear Joints TKA01-L

I recently bought the TARION Desk Camera Mount Stand for my streaming setup, and I have to say, it has completely exceeded my expectations. I use a heavy mirrorless DSLR with a lens, which can sometimes be a challenge when finding a mount that can support the weight without wobbling or compromising stability. This stand does an outstanding job in that department.One of the standout features is how adjustable the mount is. Whether I’m aiming for a high-angle shot, low-angle close-up, or something in between, I can easily tweak the positioning to suit my needs. The versatility here is a game-changer for content creators, as you can find that perfect angle every time.Another impressive aspect is its sturdiness. The build quality feels solid, and the stand is made from materials that don't feel cheap at all. No flimsy plastic or questionable joints—just a well-constructed piece of equipment that can handle the weight of my camera without even flinching.It’s clear that TARION didn’t cut corners with this one. Unlike some other camera stands that might use lightweight parts that don’t inspire confidence, this one feels premium and built to last. It's perfect for streamers, photographers, and anyone who needs a reliable, heavy-duty mount for their camera.Overall, if you’re looking for a quality camera stand that’s both adjustable and sturdy enough for a heavier DSLR setup, the TARION Desk Camera Mount Stand is definitely worth considering. It’s an investment that will likely serve you well for years to come.

The perfect stand for my camera. It’s real sturdy and is the right length for attaching to a desk.

Works but it’s a little shaky and unwieldy. Good for saving space behind my monitor.

I purchased this camera arm specifically to get top-down video, for this it works very well. I am able to mount my Panasonic Lumix G9 to the mount just fine, there's a very small amount of sag, but it's not really a problem.The construction is advertised as mostly steel, though steel comes in many different types for varied use cases, they don't list the type of steel used. The screws used to tighten down the different clamps and lock the arm in position are capped with a plastic end so you can hand tighten them. The steel used is not magnetic which did ruin a plan I had for routing cables using magnetic hooks.You can adjust the arm to fit whatever need you have, though adjusting it is not a very smooth process as the movement is pretty stiff. There are 7 adjustment points, 6 of which are grouped in sets of 2 so 1 screw loosens the hold on both adjustment points. The grouping of adjustment points means that it's hard to get precise movement when adjusting a single section. This problem is coupled with some limitations in the design where you have to rotate the sections to different positions for certain axis movements.This arm works well holding your camera in place but if you need something to move your camera around a lot, this is not it. If you're looking for something you plan on setting in one position and only occasionally moving, this will work just fine.Overall, I'm happy with the mount for my use case, but I'd only recommend purchasing if you need something you plan on keeping fairly stationary. It feels solid and supports my camera well, but easier adjustment would be nice.

Works flawlessly worth every penny

I bought two of these desk-mount camera holders before I bought this one. The thing is I have a very limited amount of space. I have 3 monitors that I use on my computer. two of which are 27" displays, and one is a 32" display. Back when I only had the two 27" displays, I was able to use a gorilla pod and i had it just sitting on the desk to the right of my monitor. But when I upgraded to the 32", the camera was overlapping a lot of my screen. I moved the other 27" monitor to a desk-mounted arm that essentially has it floating off the table. But there was no room for the camera without blocking my screen.I tried a few different mounts that advertised being sturdy and being able to hold more than the weight I needed. but they all failed in one way or another. Either they wouldn't actually hold the advertised weight, or they would just shake a lot from just typing on my computer. Or they wouldn't be able to adjust to the exact height, angle, and area that I wanted it to be.When I bought this one, I was skeptical because of the price. but after setting it up and seeing how it works, I am totally a fan! because of the design of the elbows, its able to rotate and tilt in almost any direction imaginable. I was able to bring it down low and turn it to fit into the super awkward gap between the two monitors that I have. In fact, now with this device, I can scoot the screens closer together and just leave the lens of my DSLR camera peaking through. The best part is, even if i purposely shake my desk, it doesn't move much, so it seems very sturdy. even tapping on it with a little pressure doesn't make it sag or move around or anything. which I think is perfect! The other ones i had would sag if bumped. This one, once tightened, doesn't sag at all!It did come with a small ball head that would work well. But I wanted more adjustments and the ability of using a quick release, so I used an old ball head from Neewer that I don't use. Overall, I am very pleased with this purchase!

Doesn't go together. Not sure if defective or simply a piece of garbage, but the two sections that are supposed to go together won't fit as the screw to screw hole dimensions are completely different. Either way, considering there is no other part on this device that looks like either the male or female end of this, it tells me this is a piece of garbage with astoundingly bad quality control. The only possibleway that could happen is it's a piece from a different device entirely that somehow was manufactured into this thing. Completely useless piece of gear going to live 500 years in a landfill.

Holds Sony a6600 well