FLASHFORGE Adventurer 5M Series Upgrade PEI Powder-Coated Platform, Tool-Free Model Removal, Automatic Separation After Cooling

I prefer the textured plate but this plate printed just fine. Good if textures not desired.

i used the default flashforge PEI plate for PLA for about 20 prints and every 5 or so adhesion would start to lessen. an IPA wipedown was needed every 5ish prints to keep adhesion at a *decent* level. this plate? i'm probably 50 deep with no IPA cleaning and no sign of adhesion changes. the only time i was worried about adhesion was when i heard the nozzle scraping on some infill on a print. i use gyroid, so not quite sure what happened there, but the point is this: the print was pretty tall at that point and the base layers kind of small, and the print stayed adhered to the plate. fantastic. the adhesion is so good, i have to bend the plate to get the prints off, even when cold. this is exactly what you want if you print PLA. i've used around 5 brands of really cheap PLA on this plate. and btw, 55 degrees for first layer is the only temp i've used! flashforge adventurer 5m AD5M

Items stick with out using a adhesive. When done printing printed items pop right off. This plate is more flexable than the one that came with my flashforge printer.

This surface is not suitable for PETG - it sticks too well and it you do not remove the part immediately it will pull the coating off the steel plat after it has a chance to cool. I let one print stay on overnight and that was the end of this plate. But others have had good success with ABS and other higher temp and more likely to shrink materials so probably those will be better.

Bought this because ASA would not stick to the textured PEI and I would end up with balls on my hot end. With this, ASA stuck on the bed and prints were difficult to remove from the build plate which I guess is a good thing for ASA/ABS. Prints had no warping on the bottom and the quality of the print turned out great.

I got this as a spare for when I want to put off cleaning. Usually I can get residual filament off with alcohol wipes and elbow grease, tho I'm not sure what to do if a large area is baked on.

This plate is very smooth and flat. I’m surprised at how well it holds the print.

Nice to have a second build plate to use while the other is cooling. Great adhesion.