VEVORBathroom Exhaust Fan, 110 CFM Ventilation, 1.5sones Low Noise Operation, Remote Control, Cooling&Heating, LED Light 3000/4000/5000K, Airflow Speed&Light Brightness Adjustable, Timer

Heat + light + exhaust are all on a single power connection. Those three functions are via a remote control. A substantial squirrel cage blower starts up for the heater, exhaust and ventilate functions while a silent stepper motor moves baffles to steer the air appropriately.If the unit is fed from a light switch, the default behavior is light on which is convenient so you don't have to touch the remote if you only want light. There are 4 preset settings for brightness/color temperature that you can cycle through by pressing the top left button or rapidly toggling the power. After a staying a minute on a particular light setting, that becomes the default power up light setting when power is applied. The remote needs to be chained to the wall or something because the heat and exhaust absolutely require the remote.On heat, the warm air blows down from the narrow grill. The fan speeds, the light intensity and color temp are adjustable from the remote, but the heat seems on or off only.I wanted to allow people to be able to say "Alexa, Heater ON" and skip the remote but the the remote control is a rolling code RF type so Alexa control via a Smart IR interface was impossible.One warning on install: The tiny LED housing for the light has a connector inside that can be easily unplugged if the front grill is allowed to hang from the cable while you are installing the unit. If the light doesnt light for you, just snap the cover off the flat LED housing and reconnect the cable.

We needed heat in our powder room plus a better light This serves us very well! Awesome Idea! Comes with a remote control to add the heat or the fan has a Timer as well Just an amazing product. It was installed to replace our old fan system so happy with the results really makes a difference The light is really a great addition to our existing fan/light truly does a great job & very minimal noise when fan/heater unit is on made very ewell!

I will start with the pros of this unit. It is nice sized and look okay when installed. The light is adjustable, from the remote, to very bright to night light as well as cool to warm color settings. The fan has great flow and the heater works as well as any other unit I have installed. The price is fantastic for all the features.The not so good. This unit was picked because of only having one gang light switch and no other wiring going up into the attic. The house was originally built without a fan in the bathroom which is needed by code in our region. This unit only has one hookup, unlike many units that have multiple hookups. After reading the manual it is supposed to have constant power all the time. When hooked up to a light switch it will take about 2 seconds before the light comes on and beep every time you turn on the light. Then followed by the unit cycling the damper. There is no way to wire the unit to have power all the time and use a switch to turn on the light. The beep every time someone goes into the bathroom is not ideal.Installing this unit is also very challenging and pretty much impossible without access from above. You must cut a very precise hole since the sides only have about 3/16" clearance and it sit beneath the drywall meaning that it is installed after you hang drywall. Problem is that it will not fit in the hole you need to install it. You must cut a larger hole to get the unit in place if you do not have access from above to connect the vent. I will also add that mounting of the unit and its wiring terminals are not up to par.If you do not mind wiring constant power and using the remote for the light and have attic access, then this vent might work great for you at a great price. If not, I would keep looking. The delta unit I ended getting was a few bucks more and worked much better.

This works great. Some of the reviews are not about the product but the ability of the person to install it. Yes, you need attic access to make the installation work. Sure you could cut a bigger hole in your drywall, but maybe this isn’t the exhaust fan for you. It’s best to wire it to a constant power source. Then you run everything off the remote. That’s great, no running wires for a switch. All functions work perfectly. Light is bright but also dimmable. Heater is warm. And the exhaust fan is strong. Can be installed directly over a shower or bathtub if you wire it to a GFCI protected outlet. That’s how I set it up.You can’t run the heater and exhaust fan at the same time, you either exhaust the steam out or you run the heater. Im fine with that, I just switch it to exhaust after I’m done with the heat and set the time for 1 hr to dry out the bathroom.We’ll see how it holds up over time.

enjoy the many features. installing can be challenging. check your attic space.It very quiet. heat works great.

Other than the semi confusing remote and the poor instruction Manuel the unit puts out plenty of heat. It's great after a shower .

After cutting the proper size hole and getting ready to install the unit I discovered the light did not function. I reached out repeatedly to Amazon and Vevor to try to arrange a replacement as that wasn't an option available through the Amazon website for this particular product. I've still got no confirmation that are replacement will be sent and no direction on how to return the broken unit. I don't believe how this is how Amazon Prime is to function. And apparently Vevor washes their hands of you once they've sold you a product... When I finally received the replacement instead of a new bathroom fan it was a single phase induction motor. These people have no quality control or product support.

I installed it right outside of the shower door. It feels great when the heat comes out. This is a very good buy.