ABS Plastic Sheet 1/16 Inch Thick 8" x 12" (4-Pack),Two-Sided Heat Moldable Panel (Thermoplastic Textured Front & Smooth Back), White Thermoform Board Great for DIY Projects, Decor, Handcrafts

This PVC sheet is of good quality and arrived on time and as described. I use it primarily for making control horns for my RC planes, but I'm sure I'll also find other uses for this product.

Bright white shiny on one side, textured on the back side. Was perfect for my project

I bought this to put under the front tires while doing alignment changes after frond end component replacements. Works perfect.

I intend to glue and screw this plastic plate to the fiberglass roof of my motorhome as a base for the starlink mount. HOPEFULLY it will be secure enough (Using an adhesive and screws) to hold my Starlink Gen3. Since I tow a vehicle, I wont be exceeding 65 mph. And the mount is sloped with the lowest profile end toward the front of my coach.This is thick enough it shouldn't flex and should be stable enough to support the Starlink Antennae.This is going to be a really great idea or it will pull off a large enough piece of my roof.....sunroof installation?

Just as described, Just what I needed to and make braces for a wind damaged Gazzebo.

The ABS 1/16" thick plastic sheets were moldable although they were stiffer than I expected when using a blow drier. Using a vice to hold the sheet and a short piece of 2x4 allowed me to make straight and precise bends and achieve exactly the goal I wanted: recessed light shades that didn't stand out against the white ceiling and lights but prevented reflections on a tv. Next time I'll try the boiling water option that I suspect will make the plastic more malleable.

Nice textured material that makes nice modern looking escutcheon for pies of all type going thru walls

You can tell that they are made with a good quality of abs plastic because when using acetone to dissolve and weld pieces of them together, the seam is strong.