Husky Liners — Front Mud Guards | Fits 2011-2024 Dodge Durango, no R/T Models, Front Set - Black, 2 Pc | 58001

I installed these on a new 2016 Durango R/T and they are awesome! 59001 are the fronts, the rears are 58001. Very easy to install, turn the wheel out of the way, pry the centers out of 2 existing panel retention clips, then remove the clips from the fender liner, pull back the fender liner and install the retaining clip nuts, put the fender liner back in place, put the guard up there and install the 2 supplied screws. There is one more hole you have to drill through the plastic lower body molded piece that runs the length of the vehicle, then when you install the screw you have to reach up from under the vehicle and place the nut on the screw, tighten and your finished. These are made well, fit the vehicle really well, look great and are a great price. I am very happy.

These mud guards fit my vehicle perfectly and look like part of the car and not an add-on. They install very easily. I put a little bit of Loctite on the screws to keep them from getting loose. (past experience)

2019 Dodge Durango. Great aftermarket mud flaps. Well made and simple install. Just be sure to read the directions fully and don’t rush. Before any install I always download the instructions before hand from the manufacturer website to familiarize myself with the parts and what’s needed. I did read other comments saying they had to remove the wheel but I didn’t. All I did was turn the wheel to gain access and was able to fit a standard screwdriver and drill in the area for tightening the bolts. I also had to lay on the ground to gain access behind the rocker panel to attach the bottom c clip and screw. On a scale of 1-10 in difficulty of installation I would rate a 2. Tools needed: flat head and Phillips head screwdriver, drill and 1/8 drill bit. Also maybe a small still or crate to sit on. Install time maybe 15 min or so.

Fits nice and looks very good after installed

I bought both the front and rear, so this review applies to both. The flaps fit and look great. However, they look like they are just the perfect fit after you get them on. Let me tell ya, I had to "jigger" around with each flap a little because the pre-drilled holes in each of the four flaps did not match up just right with the holes in the fenders of my 2025 Durango GT+. The person who says they got all 4 of them on in 30 minutes or less...is a far better person than I. I did NOT have to remove any of my tires, but it took me about an hour. If you buy these thinking they are going to be "easy-peasy", 1-2-3...I am here to tell you it was not that way for me. Again, they look great...but it takes more than just a hot minute to get them on

2021 durango

It took me about 30 minutes to install all 4 of them everything that you need comes in the package. Tools that I used was a clip removal tool, a cordless ratchet, a regular ratchet with a socket ( I can't remember what size) a small screw driver to install the rear ones because I did not have to remove the wheels at all.They look amazing. This installation was done on a 2019 dodge Durango GT plus.

It was hard to find guards for my GT Plus but these actually work and fit well. I’m satisfied.