QualGear QG-TM-001 Picture Hanging Style Ultra Low Profile TV Wall Mount for Most 37 to 70-Inch TVs and Monitors, Aluminum [CHECK VESA COMPATIBILITY BEFORE PURCHASE], silver

After reading MANY reviews and looking at three similar products each double to triple the price, I decided to go with this for my new Panasonic 65" mini-led TV. I wanted it flat on the wall, with no need to position or rotate/tilt. This offered the closest application to the wall .4/.5" - I'm happy to report it worked perfectly. Now, you can flex the bar with your two hands OFF the wall, but secured to the wall it's more than strong enough to hold the properly sized/weighted tv. Don't be afraid. Had every part necessary imaginable included with multiple screw sizes. I was fortunate my application hit TWO STUDS so I'm very confident of its installation. DO pre-drill out the screw-holes at LEAST 3" inches deep as the thick lag screws are a BEAR to screw into the studs easily. My only mistake was not having a metric Socket wrench to make their tightening easier. You WILL STRIP the screws with a Phillips screwdriver and practically strip your hand in the process. PLEASE do yourself a favor and have the appropriate size socket wrench/head available and you'll be fine. I used four lag screws into the studs and it felt very secure. I would suggest if you don't hit two studs to increase your four screws to SIX if you are using in drywall applications. I think adding the additional screws will stabilize the wall plate. Do yourself a favor and loop a LONG string between the pull-downs that clip the bottom of the holder into place AFTER handing the tv. it will be IMPOSSIBLE to try to grab them once on the wall .. impossible. Pull down and click into place and then you can cut the string and remove it so it's not visible or tuck it up behind for future use. I'm a thoroughly impressed by the relative ease, contents and SLIM attachment to the wall. I'd buy this again and look no further.

This TV mount is very good.We enjoy a more clean and minimalist house. For this reason we were looking for very slim TV mounts.This TV wall mount is great, because of price, strength, thickness and easy to install process.Two monta ago I installed it first in our master bedroom to mount a 65” TV. And last week I got another TV mount to hang a 43” TV in the guest bedroom.Works perfectly, no problems at all. Both are installed in aluminum studs.

My review is for the smallest, 13"-27" mount.Due to the location of the HDMI port on my TV I needed a smaller VESA plate than most mounts have. This mount did the trick, and is nice quality for a great price, too! It comes with a complete set of bolts for mounting to practically any kind of wall you can imagine and also includes a template for positioning the bolts, which is a nice touch.Now for the negative:Installing the lag bolts into the wall stud was not as easy as it could have been. When it came to time to install them, I happily grabbed my impact driver and was just about to drive those bad boys in when I noticed a little warning box in the instructions: no power tools allowed! What?! These were no dinky little screws, these were beefy lags, so what gives? Not wanting to risk the hassle of dealing with broken bolts, I went ahead and busted out the socket set instead. Which was a little more challenging to keep straight while getting started, but worked fine. Until I collided with the bottom wall hinge. It aaaaaalmost cleared, but not quite. No matter how I tried, the hex head of the lag bolt just barely hit the bottom of the hinge and could go no farther. Had to loosen the hinge bolt until the bottom nut was out of the way, finish driving the lag, then tighten it back up. Not a huge deal and didn't affect the performance of the mount, but should probably be mentioned in the manual. Didn't have the problem on the top, where the hole for the lag bolt hole is farther away from the hinge. Other than that hiccup, and the fact that our lathe and plaster walls are almost impossible to locate studs in, the install went quick and easy and the mount works great!

The QualGear QG-TM-002-BLK Wall Mount is a solid and ultra-slim option for mounting 37” to 70” TVs securely. I installed this on my living room wall, and it holds my TV perfectly flush with a low-profile design that looks sleek and modern.The installation process was straightforward, with clear instructions and included hardware for different TV models. The heavy-duty steel construction feels sturdy and durable, giving me confidence that my TV is secure. Once mounted, the TV sits just 1 inch from the wall, making it look clean and professional.One small thing to note: This is a fixed mount, so if you need tilting or swiveling, you might want a different model. But if you’re looking for a simple, no-gap mounting solution, this one is perfect.And here’s a quick joke: Why did the TV love its wall mount? Because it always kept things steady in the relationship!Overall, the QualGear QG-TM-002-BLK is a sturdy, low-profile, and reliable wall mount for large TVs. It’s easy to install, holds securely, and gives a sleek, modern look to any entertainment setup.