Cougar MX330-G MX330 Mid Tower Case with Full Tempered Glass Window and USB 3.0 , black

Looks clean, good airflow, tons of room for fans and on the cheaper side.Easy to build in but some caveats:Get your CPU power cable(s) ran before screwing down the motherboard. They won’t fit afterwards. Others have said they had trouble with ATX boards fitting. I did not. Also the peerless assassin 120 (not the SE) fits fine although pc part picker may not have it as compatible. Plenty of room in back for cables too. The glass panel sits on top and sticks out from the side of the case. More expensive cases will have the glass flush, and I like that aesthetic better, but for the price its fine.I needed a case with a dvd drive and this one fit the bill. There’s actually two slots up front but the lower is blocked by the mesh. The mesh can be removed but it doesn’t have rails to mount.

It's always a good idea to stick to the basics. This case isn't anything flashy with over the top designs and RGB everywhere you look. However, it has literally everything you need to keep your pc cool, clean and keep your components lasting as long as possible. Simple and to the point design, fantastic airflow and 3 dust filters to save you the headache of having to dust your pc every week (although it never hurts to do that). I spent a whole week looking at cases and it became very clear that a case without flaws simply doesn't exist, so focus on what's really important and practical. First of all, this case is way more spacious than it looks which made building in it a breeze and its airflow is fantastic. It has a front dust filter behind the already mesh panel, a top dust filter and a PSU dust filter. The cable management is great and the case itself feels very heavy duty without weighing a ton. Of course having 4 usb ports in the front are always a plus. Compared to literally every other case this 1 takes the prize by a long shot and somehow its still affordable. The only flaw this case arguably has is its only meant to have 2 fans in the front, but I easily mounted a 3rd fan on there with some zip ties (they also give you the option to easily drill screw holes to make it fit but I didn't wanna bother just yet). The bottom fan will be split between the top components and underneath the PSU shroud but as far as I'm concerned it looks great and provides extra cooling for the PSU. Do yourself and your components a giant favor and buy this case.

So here I am, writing this review for the case I bought using my newly built PC using the case as I write this. Honestly, for about $45, the amount in which I bought the case (not counting shipping fees and state tax), this is a pretty amazing case. Don't get me wrong, it's not the best case compared to more higher-end cases such as NZXT's H510 case, but for what its worth, if you want a PC case that looks pretty neat and has a high amount of airflow, then the Cougar MX330-G is the perfect PC case for you!PROS:- It has a LOT (and I mean a LOT) of airflow thanks to the mesh on the front and top panels, and it supports up to five cooling fans up to 120mm (two for the intake, one for exhaust, and two on the ceiling of the case), essentially keeping your PC nice and cool, even in the toughest workloads, meaning you won't have to worry so much about your PC overheating. It also supports water cooling radiators from 120mm up to 240mm.- Supports up to two 2.5" SSDs and two 3.5" HDDs, allowing you to store as many games and software as both your SSDs and HDDs can handle when combined.- Comes with a transparent tempered glass window panel, allowing you to see your parts nice and clearly. It's also perfect if you want to show off builds such as full RGB builds (like mine), or builds that utilize water cooling thanks to its minimalist style (more on that later).- Supports graphics cards up to 350mm in length (up to 13.8")- Very minimalist style and comes with dust covers for your PSU and 3.5" drive bay, making your PC look even better, especially when going for a theme/style for your PC.- I/O Panel comes with two USB 2.0 slots, two USB 3.0 slots, Audio Jack, Mic In, and a Reset Switch.- It also comes with a magnetic dust filter on the top of the case, essentially making sure little to no dust gets inside of your case, which also means you don't have to clean the inside of the case as often.- The interior of the case is nice and spacious, allowing for upgrades as well for your starting PC too.CONS:- Cable management isn't the best with this case, but it's fine. (If anything, would recommend a semi/full modular PSU)The Verdict:While not the best case in the world compared to the more higher-end cases that are more costly, for what its worth (around $50 depending on where and who you're getting it from, not counting shipping fees and state tax), the Cougar MX330-G is nonetheless an amazing case, and is a great starting case for those who are getting into the world of PC building. It also makes for a good case when it comes to budget building too, the only downside being its cable management; it's not the best unlike other cases such as NZXT's H510 case, but it's fine nonetheless, as it is definitely outweighed by the many positives this case has to offer. If you're looking for a case that has a minimalist style, a tempered glass window panel, and excellent airflow but don't want to spend too much on the case, then Cougar's MX330-G just may be the case for you.

Really nice construction! Power button on top and a great front panel for all the hookups you need. Great ventilation. Magnetic filter on top for ease of cleaning and just everything works. Love the tempered glass panel and great air-flow construction. I have owned a lot of computer cases and built a lot of computers...this one is perfect as best I can tell. Priced great! I cannot think of one thing to improve. For those that own one you get it, those who think they don't need it are deceiving themselves.

At or around $40 this case is an excellent fine looking design no RGB included.2 USB 2.0 & USB 3.0 ports on front of case.GPU clearance is 30cm or 33cm if fans are placed in the front bezel.(ARCTIC Freezer II 240 AIO in use, Highly recommended)PROS: 155mm or 6.1" clearance for air coolers.legacy DVD slot upfront for media creators or HTPC enthusiasts.Forward room up to 240 LQ radiator.Proper fit and finish on edges and paint.Glass or acrylic side options.Room for cable management.CONS: Only a single forward radiator placement, limited to 240mm.In my build, the front DVD slot was rendered unusable due to the radiator.No front filter but PS & top are provided.It would be nice if the front bezel was separated from front IO wires.