Scythe Slip Stream SY1212SL12M 1600 rpm 120mm Slim Case Fan

I was in need of 2 slim 120mm fans. I have heard good reviews on Scythe fans and thought I would try them out.Positives:Decent air movement for a slim fanFits tight areas with easeWires aren't short, so they can placed a good distance from any fan headers an still reach themNegatives:They aren't quiet and are the loudest fans in my caseWires and connector aren't all blackThey are 3-pin and not pwm, so they run at 1600rpm at all timesOverall, I would have to say these are good fans despite the dba level they produce. The amount of air flow from them is enough to keep positive pressure in my case. If you're looking to build a quiet system, then you might not want these. If sound levels is not your concern, then I would recommend them.

Fit perfectly in the small space I had between the front plate of my case and my drive bay. My only complaint is that the fan didn't come with gasketed screws to help dampen vibrations but with that said its even quieter than my standard case fans. Great little fan and worked perfect in my builld.

Normal side case fans wouldn't fit with the Hyper212 Evo CPU cooler in my case. These fans fit perfectly and aren't too loud.I am knocking off a couple stars for the wires though. They are super thin high-gauge wires. I accidentally ripped the 3-pin end off of two of these fans because they are side panel fans for me, which you have to unplug-replug often when doing stuff to the PC. I ended up splicing them into a molex adapter, which works but is kinda ghetto. Plus, the wires have no sheath and are ugly colors. I covered them with electrical tape.

I'm using this as an upper discharge and needed a thin fan. Screwed in fine, wires have no sheath, but I just taped them up and it looks fine. The wires are a small gauge but it is only a .19A fan so they don't need to be thick. I can't attest to the volume of the fan as I'm using it in an auto repair shop setting so I have louder things going on around me. I am happy with the volume of air the fan moves so I have to say I'm happy with it. Got exactly what I ordered.

I needed a slim fan to use as an exhaust on the top of my case (n200)This works perfectly, its quiet and moves air.I was on the fence on giving this 4 or 5 stars because the wires are ugly colors and/or have no sheath.

The coil whine on these is annoying as... well as a of fan can be.

I was honestly expecting it to be silent, it's just quiet. To be fair, I have two of them.Also, to be fair, if you have an ITX case, these are about the only fans that will fit.

I have 4 setup in push/pull on a Corsair h100i running a AMD9590 CPU. They are working perfectly keeping the CPU at 50c or less. Ideal for cases with limited space above the motherboard.

Con adaptadores para molex incluídos, sin embargo llegan a ser muy ruidosos cuando funcionan a su máxima capacidad.Considera realizar ajustes en tu configuración para controlar la velocidad.

wonderful fan...just what i needed for my mini itx build...