anidees AI Aureola V2 120mm 3pcs Adressable RGB PWM Fan Compatible with Aura SYNC/Mystic/Fusion MB with 5V 3pins Header, for case Fan, Cooler Fan, with Remote(AI-Aureola-V2)

I think these fans look amazing. They are quiet, easy to instal and work with ASUS aura sync seamlessly.Not looking to spend over $100 for similar Corsair LL series fans? These are the ones to get.The only issue I’ve had is with the ordering process. I ordered 3 sets of the 120mm. Got two sets 120 mm but the last one was 80mm. Replacements were sent and it turned out to be 80mm again. Returned the 80mm sets and tried ordering the 120mm set again. Guess what happened? Another 80mm set was delivered. Will be returning them again and probably going t wait a few weeks before reordering.I need I’m the third 120 set to complete my build but I have temporary fans in the meantime.

While the fans themselves are pretty easy to install, the wiring is another problem altogether. Good luck replacing the controller if you have to, the fan cables are nearly impossible to remove without removing and breaking the connectors on the controller. The PWM control does not work at all, even though I have it set up correctly. I have spent months troubleshooting this, and I do not know what else to do, i'm replacing them. The frosted edges of the fans have decayed to a rotten yellow color in several places, making my PC-O11 Dynamic look terrible. You have to get a mod to control these with razer synapse, and even then it only works in the Chroma Studio. Asus Aura compatibility is there, but you do not have granular control over the LEDs even though it uses an ARGB header. The remote control is almost impossible to use, as you have to press several times just to get one button press to register. The magnetic mount on the controller is helpful, but it is quite thick and will not fit into a 2.5" drive bay or sled on my Dynamic. The controller frequently crashes and requires a reboot, leaving me with no RGB until a reboot. I give it two stars because the fans do in fact spin and the RGB does light up.

I purchased this three pack to add to my Anidees Crystal Cube AR 3 that already came with 5 and a fan controller. My case is now running 8 of these fans and the RGB effects are gorgeous! My only complaint is that they do not come in higher CFM or High Static Pressure as I would like to use these on my liquid cooling radiator instead of the ThermalTake Pure 12 ARGB Sync Radiator Fan TT Premium Edition so everything matches.Great fans for the price and easy to config with Gigabyte RGB Fusion 2.0!Great fans and

Fans work wonderfully for the price. Front fans are the aureola 120s and the back and top fans are tesseracts with anindees RGB strips. Fans have good airflow and aren't loud at all.RGB settings in the video are just some of the options from the controller and are not presets from the motherboard, but this also syncs easily from the aura sync on my mobo. Fans and LEDs are all bright and vibrant. Tesseracts are some of the only dual ring and fan LED fans I could find outside the corsairs which are far more expensive.very happy with my purchase and whoever runs thier Instagram was very helpful. For anyone wondering, any fan that has a v2 version, also has an original version that does not have aura sync. Only the v2 versions of those fans will sync with your mobo. Also the "duo" versions of the fans have an LED ring on the inside and outside of the fan while the regular versions only have the ring on the outside.hope this helps and highly recommend to future buyers!

I spent $99 bucks for the remote to stop working on the second day. I am not happy with this one bit. and dont understand why the lights still work but the remote doesn't. If I send them back , i'll just have to wait and not be able to play on my pc! You should really fix the remotes better. no reason for them to go out on the second day. I have had my LED light remote for going on 2 years , so why does this remote break on the second day. It has been just sitting there.

Not much to say really! Plugged them in and they work out of the plug just as you'd expect. I added these to the anidees Crystal Cube MAR 3 case on top of the existing ones of the same model. Very much a light show wind tunnel on max brightness/fan speed. As a note, I only tested with anidees' fan controller (included) so I don't know how it might work plugged into the motherboard directly using, for example, Aura Sync or similar.

These fans are quiet enough even at full speed. They came with an 8 slot (fan) and 2 slot (RGB strip) power and RGB controller, has an actual controller if your motherboard doesn't support RGB.Nothing bad comes to mind except maybe that fact that they don't fit flush against the case. This theoretically cuts down on airflow, though not that important unless you're attaching to a radiator, I still wish they sealed against the case.

I bought 2 sets of these and PWM doesn't work on either set on 2 different MOBO. They do look good but I wish they could be quieter when full speed is not needed.

The fans themselves were relatively fine, the lights are nice and bright with decent colour reproduction and ran fairly quietly when using the speed control on the included remote.My main problem with these case fans is the lack of speed control when connected to the motherboard. I am using an aorus z390 elite mobo and after many hours of trouble shooting I have yet to figure out how to let the motherboard set the fan rpm. The default seems to be full speed so while they aren’t particularly loud it would be considerably nicer to be able to reduce speed when needed, without using the remote. The fan hub itself is also rather lack lustre. These are inexpensive fans but the hub itself seems to be where most of the cost was saved. If you pull too hard on one of the connectors the entire pcb inside the plastic housing moves. If I find out how to control the speed using the motherboard I’d probably rate these a little higher.

Easy

Junk, I should paid the 10$ more for coolermaster. Purchased based on 4.6/5 stars, my own fault. The aura port on node got pushed in from first time plugging it in, I can assure you I wasn't being rough with the thing neither. It has its own 5 pin, so useless without node. This is the quality I've come to expect from China, so I geuss its my own fault.

Super Produkt, habe Mittlerweile 11 Stück verbaut. Laufen super und sind relativ leise. Schade nur das sie nur mit dem eigenen controller verbunden werden können

Very good looking fans, low noise too. I've been having them running for months, still good and quiet.