Anesty A1 Cordless Automatic Airbrush Kit, Portable Airbrush Kit with Compressor for Makeup,Cake Decoration,Barber, Painting Model,Painting Nail

The best airbrush of all the brands out there. The fan is tied to the fluid control so you don't waste battery. I just wish it wasn't such a pain to put back together when doing a deep clean.

Does not work i have not even put paint in it yet and it’s not working when I got it in the mail I put it together press the button one time and it would not turn off had to screw the hair brush gun off to and it was still going

Works just fine now 👌

I really liked the consistent air pressure and good coverage provided by the airbrush. I really like the ability to use this at my hobby desk to paint smaller parts during my finally assembly process of my plastic models. One thing i noticed was the very faint LED Light within the USB Cable, two colors, red and green for obvious indication; wish it was a little bit brighter. Also battery level would be nice to tell when your are near the end of it's charged life. This will allow for you to plan the cleaning of the brush, as the charge takes 30 mins (approx), the paint in the cup may dry out causing delays in its next use due to extensive cleaning. The other shortfall would be the fixed air pressure. Most people would appreciate the current discharge level, but more advanced users would have appreciate this feature. Currently I am using Gunze paint with a Mr Leveller and also Isopropyl alcohol as well, with no issues. Flow is good as expected.Overall, my initial impression is very good with a couple shortfalls that does not dissuade me from purchasing this item. I really like the mobility aspect as I travel allot and work at two different station for my hobbies. This is a really nice addition to my workbench.

Used to paint a place on the car. Once we got the paint to acetate ratio right, it went on very easy.Easy clean up too.

I finally got this thing to spray cleaner and I will move on to paint soon. I wanted to update this review to 3 stars because of this though. To call this beginner friendly is not accurate to me for a few reasons. The instructions are very short and to the point with not much detail at all. It does not really tell you how to troubleshoot the product if you run into issues.I understand it is a simple thing but there are a lot of issues you could run into with it. I believe mine just ended up clogged in some way but nothing I did would fix the clog. It took soaking the parts in cleaner for a few nights to fix it.One other thing I also noticed that may have fixed my issue. The needle tip that unscrews with the little metal wrench had the tiniest black rubber o-ring on it. This thing is extremely small. It was towards the bottom of the threads and almost fell off it when I removed it. I put it back on and moved it up to the top of the threads where it could get a better seal. This may have made the difference. Small change but a bad seal is a bad seal.***** Original review belowI will continue playing with this airbrush and seeing if anything improves but my patience is almost gone with it. I feel like I have done everything I possibly could to try and get this to work. I am open to suggestions as well if anyone knows what may be wrong. I have cleaned it several times and even let some parts soak once to make sure it was good and it still did not help.I may have gotten a dud here. I will start off by saying I am new to airbrushing. I spent a lot of time watching videos and learning about the hobby before buying this though. So I did not go in blind and have a decent idea of what I am doing just based on receiving instructions from people that use these for a living. I thinned my paint down to a 1:1 mix and even tried 1:4 mix where the reducer is the larger part of that. Super thin, nothing.Also just to be clear this airbrush is pumping out air. I made sure the device was fully charged first too before even trying to use it. That part is working fine. So I know it has to be something internal here that will not release the paint well. I can only get drops out at a time of cleaner when I try now, no mist. Many big globs of paint. That is all it would do is glob onto the end.I bought some airbrush reducer/medium with this from Liquitex https://www.amazon.com/gp/product/B001US2NQA . When I first tried to use it I thinned the paint 1:1 with the reducer and nothing would come out of the airbrush. I dumped the paint out and went even thinner. Before trying that mixture I put some airbrush cleaner through the unit and it would not even spray this and it is basically water. I completely disassembled the air brushed and cleaned everything. I have got it to spit a few puffs of cleaner once when I was shaking it in a downward motion. I also got a puff of paint once and some very spotty spray. For the most part it will not spray and it does not work as it should.Around the bottom of the paint hopper on this it leaks pretty badly. Fairly constantly as you attempt to use it. It is not possible to screw this piece on any tighter, it seems to be maybe a pressure fit from the factory. My pictures show this with the yellow line around it. This was an issue the entire time I used it and was very frustrating as paint was getting all over because of this.I have spent at least 4 hours trying to get this to work. Watching tutorials on cleaning and proper usage too. Everything I watch tells me I am operating this device correctly and it should be working. The most damning evidence against it is that it will not spray even just the cleaner alone.The battery compartment can be unscrewed and everything is just there with all the wires. So do not get this bad boy wet just in case. It does not seem to be fully sealed. This was a little sketchy looking but just don't open the bottom. It is good news if you are into DIY and may replace the batteries later, at least.

I’ve had this for a year now and it still works perfectly. Not only that, but I’ve used it maybe five times in the past year and I’m still going on the first battery charge. All you have to do is keep it clean and it will co to ur to work great. Be thorough with your cleaning after each use, and this will last you a long time.

Idk what happened with this but I broke after the second week. The air is flowing but the dye isn’t going through.