Description
- Package Includes: (1) Crest ProLITE 3.0 3060 Watt Professional Live Sound Power Amplifier. (1) Peavey PVI100XLR Wired Dynamic Cardioid Vocal Microphone+Case+Mic Clip+Cable. Features: Crest ProLITE 3.0 Professional Power Amplifier. Rated Power Bridge 4 ohms - 3,060 Watts @ 1 kHz 1% T.H.D. Rated Power Bridge 8 ohms - 1,560 Watts @ 1 kHz 0.1% T.H.D. Rated Power (2 ohms) - 1,530 Watts x 2 Channels @ 1 kHz 1% T.H.D. both channels driven.
- Rated Power (4 ohms) - 840 Watts x 2 Channels @ 1 kHz at <0.1% T.H.D. both channels driven. Rated Power (8 ohms) - 430 Watts x 2 Channels @ 1 kHz at <0.1% T.H.D. both channels driven. Rated Power (2 ohms) - 1,630 Watts x 1 Channel @ 1 kHz at <1% T.H.D. Rated Power (4 ohms) - 930 Watts x 1 Channel @ 1 kHz at <0.1% T.H.D. Rated Power (8 ohms) - 470 Watts x 1 Channel @ 1 kHz at <0.1% T.H.D. Minimum Load Impedance - 2 ohms. Maximum RMS Voltage Swing - 71 volts
- Frequency Response - 20 Hz - 60 kHz; -0.2 dB, -3.0 dB at 1 watt. T.H.D. (2 Channels x 2 ohms) - <0.1% @ 1,400 watts per channel from 20 Hz to 4 kHz, decreasing to 1,200 watts at 20 kHz. T.H.D. (2 Channels x 4 ohms) - <0.1% @ 850 watts per channel from 20 Hz to 20 kHz. T.H.D. (2 Channels x 8 ohms) - <0.1% @ 435 watts per channel from 20 Hz to 20 kHz. Input CMRR - > - 76 dB @ 1 kHz. Voltage Gain - x 75 (+37dB)
- Crossover - 100 Hz switchable 2nd order High pass and 3rd order Low Pass per channel. Crosstalk - > -76 dB @ 1 kHz at 100 watts power @ 4 ohms. Hum and Noise - > -103 dB, "A" weighted referenced to rated power @ 4 ohms. Slew Rate - > 12V/s. Damping Factor (8 ohms) - > 255:1 @ 20 Hz - 1 kHz at 8 ohms. Phase Response - +20 to -70 degrees from 20Hz to 20kHz. Input Sensitivity - 0.775 volts +/- 3% for 1 kHz 4 ohm rated power, 0.750 volts +/- 3% for 1 kHz. 2 ohm rated power
- Input Impedance - 15k ohms, balanced and 7.5k ohms unbalanced. Current Draw @ 1/8 Power - 785VA @ 2 ohms, 475VA @ 4 ohms, 300VA @ 8 ohms. Input Wattage @ 1/8 Power - 495 watts @ 2 ohms, 280 watts @ 4 ohms, 165 watts @ 8 ohms. Current Draw @ 1/3 Power - 1,830VA @ 2 ohms, 1,020VA @ 4 ohms, 575VA @ 8 ohms. Input Wattage @ 1/3 Power - 1,295 watts @ 2 ohms, 665 watts @ 4 ohms, 345 watts @ 8 ohms. Idle Consumption - 75 watts, 160VA. Cooling - Temperature dependent variable speed 80 mm DC fan
Controls - 2 front panel attenuators, crossover select switch for H.P.F, Normal and L.P.F. and input mode switch for Stereo, Bridge and Parallel. Indicator LEDs - 2 DDT (ACL clip limiting), 2 Signal presence, 2 Active status, 2 Temp and 2 DC protect. Protection - Thermal, DC, subsonic, incorrect loads, under and over voltage. Connectors - Inputs: Dual Combination 1/4 XLR, Outputs: Three Speakon connectors for two channels plus bridge. Construction - 18 ga. galvanized steel. Dimensions - 3.5x19x 10.5 behind front panel + 0.6 for handle. Net Weight - 5.533 kg (12.2 lbs.*). Gross Weight - 6.3 kg (13.9 lbs.). Warranty - 5 years. Rated power readings made with BW: <10 Hz to 22 kHz. All power measurements made at 120 VAC and 240VAC. 2 ohm power is time limited by circuit breaker. Net Weight does not include power cord. Features: Dynamic cardioid microphone designed for stand-mount application. On/off switch. Clean, natural sound. Low pop and handling noise. Solid Zinc die-cast body. Low-gloss black finish. Includes carrying pouch, mic clip and 6 meter XLR cable. Specifications: Frequency Response: 80Hz-12000Hz. Sensitivity: -53dBV/PA (2.2mV/PA). Output Impedance: 500 ohms. Packed Dimensions(W x H x D): 3.75" x 8.5" x 10.5". Packed Weight: 1 lbs.
