Full description not available
Brand | Issyzone |
Item Weight | 3.52 ounces |
Package Dimensions | 6.3 x 3.62 x 0.79 inches |
Is Discontinued By Manufacturer | No |
Manufacturer Part Number | FYAMT088 |
Position | Front |
A**N
Works...
Easy install & works as it should. Makes a big difference with vision. Has not come loose in over 1500 miles of riding. I recommend.
J**D
Perfect fit on the 2019 Tracer 900GT
I have a 2019 Tracer 900GT (formerly known as the FJ09 in the U.S.) and tried these to see if they fit. As a reference of my size I am 6’1” with very large shoulders and chest (2030 pounds when I was at my Army size with low body fat, let’s just say a bit bigger now) so I generally struggle to see past my arms and shoulders on nearly any bike mirror. These installers with one wrench and an Allen wrench in under 5 minutes. On my Tracer these put the mirrors out and high enough that I could adjust the mirrors so when I just catch the outside edge of my shoulders I can still see the edges of my top box without pulling my arms in. A perfect fit on the 2019 Tracer 900GT. These greatly improved my ability to monitor traffic in my lane approaching from behind. Remember to cant them slightly forward to ensure they do not obstruct the use of the traction control switch on the left and the Run/Stop switch on the right.I believe the previous year models of the FJ09 have the same size (10mm) mirror posts so this should fit fine on those models as well.
S**S
Fits my 2012 Super Tenere.
I couldn't tell from any of the other reviews when I bought these, if they'd actually fit my particular bike, a 2012 Yamaha Super Tenere. They fit perfectly. I almost bought some expensive aftermarket ones when I stumbled upon these. They are very nicely machined, perfectly finished, and fit just right. They have top quality hardware, complete with the strange left-hand thread bolt for one side. (It's a Yamaha thing)Anyway, now I can see past my shoulders behind me. Excellent purchase!
A**R
Finish doesn’t always last
Functionally they work okay. But the left riser faded, and now looks pale compared to the right one. Someone else posted a good picture
T**N
Perfect fit
Perfect fit for 2019 MT 09. I can now use the entire mirror for rear view with no more seeing my shoulders in the mirrors. Included left side standard thread and right side reverse thread. No other parts needed. Tools needed to install are a 17mm open end wrench and a 6mm Allen wrench. The install took less than 5 minutes. Super easy!
D**Y
Great extensions, worth the money. Going to be slightly different bike to bike and mirror to mirror.
Cleared the controls fine on my 2017 FZ-09 on both brake and clutch side. They look a little awkward at first and actually decrease your viewing angle directly behind the motorcycle due to the type of mirrors the 2017 FZ-09 comes with (small, sporty.)That being said, they do give excellent side lane and rear vision when cars are more than 15 ft behind you. On even the slightest of lean angles these extensions give superior rearward view, it's just in a vertical position directly behind you they may become an issue.I'm 6'4" with long arms for reference.I'm a fool and despite reading the description on reverse threading I still nerfed up my brake side mirror bolt due to twisting in the wrong direction. KNOW THE DIRECTION YOUR MIRROR COMES OFF BEFORE INSTALL.Zero directions included with these, so make sure you visualize the bolts and loosely thread before tightening everything down.Overall these extensions definitely IMPROVE the rider's visibility and for $10 they're a win though with some caveats.
K**9
not tapped right and wrong threads for FZ09
Well, the riser came in for my FZ09 and I was excited to see it arrive. I started to put it together and discovered the threads were off. I thought it must be a tight fit, but Nope it cross threaded all four bolts from the mirror to the 10m bolt in the package. One bolt failed as I was trying to remove it now i have to drill it out. I purchased a m10 1.25 twist tap and had to tap out the risers to accept my mirrors. Then I had to retap my threads on my bike to get them straight again. Now i had to order two new m10 x 1.25 bolts from amazon 10 bucks for two to reinstall them. I am not sure what happened but this has been a royal mess to fix.
H**.
A quality product. Well worth the money.
These Risers do the job. Great quality. They raised and pushed the mirrors out on my 2017 Yamaha FZ-07. Now I just look in the mirrors and I see everything behind me. If your tired of leaning over to see the traffic behind you then get these risers and remember the right side mirror on the Fz-07 is reverse thread. Very happy. No cons.
V**E
Excellent sur une / on a Yamaha Vstar-250, 2016
Parfaitement adapté et aucune vibration. Je vois maintenant très bien les voitures à l'arrière.Perfectly adapted and no vibration. I now see cars in the back very well.
M**O
Good service
Good
Trustpilot
1 day ago
4 days ago