RETRUE Rear Air Bags Suspension Kit for 2015-2025 Ford F150 Truck Towing, 5000 Lbs of Load Leveling Capacity, Replacement for Firestone 2582 Ride Rite Airbags for Trucks Rear Suspension

Installed this on my 2015 f150 and they work great. Everything I needed was in the box. No missing parts. Installation instructions were clear and easy to follow. Holds air great! Excited to see how they hold up long term! Don't let the lower price point compared to others scare you! These look and feel like a good quality! Levels out out the truck great when pulling my 16ft enclosed trailer.

Easy install seems like good quality

Functionality:This leveling kit worked as advertised and is easily installed with basic handtools

So, the tools you'll need a Magnet!, 15mm wrench and socket, 1/2 deep well socket deep for the bump stop bolt. My shredder valves were both not seated all the way and leaked! If you get one with the elbows already on the bags don't remove them they fit at least on a 2019 f150. Other than that the instructions are pretty straight forward. Just make sure to actually read ahead before getting started!The quality seems to be pretty good so far.They suggest maintaining a minimum 5 psi but can go as high as 100. The fit on my f150 was dead on. Some people I noticed complained about the extended range fuel cell, my tank was not in my way and I do have the extended tank.The adjustability looks extremely adjustable multiple different mount holes. I didn't have to deviate from the instructionsBest of luck! Happy towing!

Installation was pretty simple, the instructions provided were fairly easy to follow and the illustrations within were clear to see. The only issue that I had was the nut welded inside the frame rail for the jounce bumper. Passenger welds broke, took me a bit of screwing around to get a deepwell and a flexhead socket inside there but once I did that, it went smooth. Driver's side went easier, I used a lot of WD-40 and a wire brush to clean up the bolt before I removed it from the jounce bumper.I also read a lot of the reviews before hand and picked up a 1/4" T fitting to eliminate separate lines for each bag. One fitting, mounted inside the gas cap and life is good. Truck rides completely different loaded than it did before. I have been very impressed so far and once I do some more hauling, I will try to remember to update this post.Now that the airbags are installed, my boat sits a little higher than it did before, may have to find a draw bar with a little more drop to it.

I have had this on my 2018 ford F150 for about almost a year now and it is holding up great. It was and easy installation.

The kit isn’t bad the install wasn’t horrible but the customer service was horrendous. When I received the original kit the U bolts were missing I reached out and I got a reply about every 12 hours from them usually in the middle of the night, there is no phone number to call, it could have been resolved in a 5 minute phone call. They wanted to send me out U bolts but it would have taken a week which was time I didn’t have, ended up ordering another kit, overnighting it and installing that one and returning the original one.

Great price and quick shipping.Was an easy 2-3hr install, including making my own bracket for the Schrader valve and a 3/8" quick connect. Allows me to use shop air or tire inflator plus a gage. Required a couple of tees, gage, 3/8" quick connect pair, etc. Made a plug for the quick connect so it won't collect rubbish, too.Very heavy duty brackets.No missing parts.No leaks.Tips:1. Upper bracket "D" goes on the driver side.2. Put the air bag to the front-most holes of the upper bracket. This allows the lower bracket to fit around the leaf spring shackles.3. Run the long bump-stop bolt out like 3/4 of the way to give you more room threading those extended frame nuts.4. The bump-stop bolt my 2015 F150 4x4 is a 13mm socket.5. Use an LED headlamp made locating the frame nuts easy.I also have 3" block (total) on my leaf springs and this airbag kit fit perfectly.A+ all-around.