Bench DogFeather-Loc 200 x 240 x 60mm - 693375

Use on my table saw and router table. So much better than the one you can get from Axminster. Bit sloppy in standard 3/4 mitre slots but tightens up ok to do it's job and loads of adjustment so great vertically on my router table too.

This jig fits the Dewalt 745 Bench Saw !I previously asked the members forum for help in adapting it to fit my T Track as it seemed loose when I tightened the knobs - It turns out I did not tighten it down sufficiently (feel like a muppet!) Thanks to those members who replied.The jig seems to be robust and the fingers appear to be stiffer than what I thought they may have been. Will try it out over the weekend and see how it performs. A good safety addition to a powerful tool.The item arrived promptly - 2 days after ordering from Buysend.

Great featherboard, but it comes designed for a standard 3/4 inch mitre slot. So if like me, all your mitre slots are different, then you just need to change the knobs and bolts, which is easy enough. Works really well once you've made it fit your particular mitre slot.

But didn't.

Great product, sticks well even on smooth mdf, would recommend.

GOOD PIECE OF KIT.

If you are using a feather board for the first time and this model in particular it is easy to over tighten the knobs in order to get a strong push against the fence stressing the feathers which in turn cause burning. The threading on the knobs are just not made strong enough to withstand dozen of uses. I think that if you use it more as a guide you will have better results and the feather board will last much longer and you will have way less burning than I did.

Bought this for my Evolution Rage 5S table saw, it would have been great except, the rage slot is too far over to the left of the blade, and this feather even when fully extended only gets the feather to about 50mm from the blade, so it will be ok for larger work, but not the smaller pieces of wood!