DuronicDM351X1 Single Monitor Arm Stand for 13-27" PC Screen, VESA 75/100 Desk Mount With 10kg Capacity for Home Office Work

Ordered this monitor stand to use with an Acer G246HLBBID 24-inch Monitor Acer G246HLBBID 24-inch Monitor 16:9 FHD 2 ms 100M:1 A 250 nits LED Acer EcoDisplay . It requires some assembling, but the instructions were clear enough and it was supplied with a range of screws of different lengths and thicknesses to fit a variety of screw holes in the back of your monitor to enable you to attach the VESA 75x75 / 100x100 enabled bracket. The stand seems more than able to hold the weight of my monitor. The stand is height adjustable and you can tilt the screen slightly both side to side and up and down. The neck of the bracket is not a long one, so there is some adjustment to move the screen further away or closer to your face, but this suited me as I didn't want the screen too far forward from the back of my desk. In work, it has made a real difference to both the space available to me on my desk as the monitor is now off my desk and to my back, which is considerably more comfortable now the angle I an looking at my monitor is more appropriate. The Acer monitor is great, but the stand supplied with the monitor a bit to short for me personally. I consider this stand a good quality product and very good value for money.

I have two of these both holding a Dell U2412M monitor up.Having used the much more expensive Hernan-Miler and Dell versions professionally I was semi sceptical that something that is so much cheaper (1/8th of the Hernan-Miller ones) could be brilliant. However how wrong was I! It is a fantastic little product.Strong and simple to assemble, you simply slide the arm on the pole, tighten and job done! The hand tightened clamp is simple and effective, you only require a screwdriver to tighten the VESA mount to the monitor. I thought these (Single Arm) were so fab i ended up buying the second one for another monitor without a doubt in my mind. I have recommended to the professional people i work with just how brilliant these are and for such a cheap price.Do not be put off by the price, these are a brilliant product and very fit for purpose, the simplicity is brilliant and makes fitting it a 3minute job, the cable tidies work well, and the range of movement is good.Highly recommend!

Excellent quality. It was good to check out the reviews first. I went for the most basic model. It's all I needed for one monitor and makes it even more sturdy because it has fewer parts that move. So much better than using the stand that came with my monitor. Desk space is valuable and now I can use Sidecar on my iPad below the monitor to use it as a second screen which is smart and cheap. Duronic is a quality brand.

My third one of these. Still an excellent product at a great price, but a couple of niggles this time, so I've taken off a star.First, the plate that attaches to the monitor was a fraction too big for the recessed section in my LG 27UL850-W monitor, so it wouldn't fit. I used a grinding wheel to remove about 1 mm from each edge of the plate, and all is fine. The issue is just as likely to be LG's fault as Duronic's, but I reckon LG calls the shots here.Second, the fore-and-aft tilt mechanism didn't work at first because the screw attaching the arm to the domed section of the steel monitor plate was done up too tight. Again this was easily fixed, but check it before you begin the assembly. To reach the screw in question you need to dismantle the joint behind it, which is a pain if you've already hung the monitor.-----------------Updated 2018-01-02: I've just bought my second one of these. Same excellent quality, and I'm pretty sure the price has not increased. Thoroughly recommended.-----------------This is an excellent product at a very reasonable price.I bought mine after acquiring a 21-in. monitor to use as a second screen alongside my existing 24-in. monitor. The new monitor lacked a stand, and in any case I wanted to use it in portrait mode. I'd never used a desk clamp for a job like this, and I've had one or two bad experiences with clamp-on desk lamps, but I needn't have worried – this clamp is extremely secure.The support as a whole provides all the reach you'd need for mounting on a standard office desk. It's easy to set up and adjust, sturdy, but with easy movement when needed. And if you work with documents, to try a second screen in vertical mode – it's made all the difference to my work setup.

la verdad lo compre con poca esperanza pero estoy encantado no zimbrea nada y se puede mover tranquilamente y es muy muy estable y de calidad ,trae el detalle de las cintas de velcro para sujetar los cables en el tubo .

The monitor arm seems to be stable and has no problem holding either one of my 27" monitors. You can even remove or add the articulated links that make up the arm by just unscrewing two screws and removing that specific link. This can be useful if you realize that you only need one link instead of two.This monitor arm is mainly aimed at fixed installations, i.e you probably don't want to constantly move around your screen, tilting it or pivoting it. In order to tighten down the tilting mechanism you have to undo a second screw which is a bit inconvenient and also makes it hard to dial in the correct torque for the screw. The same screw that adjusts the friction for the pivot also adjusts the friction for the tilt, which is not optimal. All this might result in some extra tweaking before you're happy with your setup.As a side note: The Duronic logo can be removed from the base of the stand by rubbing it with an isopropanol soaked cloth if you don't want it staring you in the face.

Super stabile Halterung, habe sie jetzt länger im besitzt und muss sagen, bin wie am ersten Tag begeistert.wer eine stabile Halterung sucht, dem ist hier geholfen...

Gut für unseren Küchentisch als Monitor/ TV Halterung

Facile da montare e robusto, fa il suo lavoro egregiamente