JARLINK Vertical Laptop Stand, Aluminum Laptop Holder Desktop Stand with Adjustable Dock Size (up to 17.3 inches) Compatible with All MacBook/Surface/Dell/Gaming Laptops (Gray)

It holds my Dell XPS13 easily, seems to be of good quality, and looks nice. Recommended!

The stand is nice and heavy with silicone on the whole bottom so if feels nice and secure supporting your devices.I ordered this stand specifically because the listing indicates the minimum width of each slot at 12mm, which is smaller than any similar listing I found on Amazon. I have an Asus Zenbook UX305 which is only 12.3mm thick at the fastest part and I wanted to be sure I would bet a secure fit without a lot of wiggle room. However in actually the minimum width it can be at to appears more like 13mm which has left a little room. I have decided it's not enough difference to be a huge problem and my laptop is still secure enough but I did at first consider adding some kind of shim to narrow it further.If you are particular about getting the width's set exactly right you should consider that the mechanism for adjusting this stand is different than some with a side nob. The adjusters are only accessible from the bottom. They are bolts you loosen allowing the pieces to slide freely. It is difficult to keep the pieces from shifting somewhat when lifting the stand to tighten it in place, making fine adjustment a little tricky. If you're not a huge perfectionist about a milometer or two one way or thwr other though, it's a sturdy and secure design.The two sides are independently adjustable and the stand shops with a small hex key for making these adjustments and one extra screw just in case something happens (although I can't imagine what).If you have a laptop on the fatter side the silicone pads on the bottom of the slots may notcometely protect your laptop as they will cover less of the bottom of the slot the wider the slots are oppened. (See second pic)

Needed some more desk space, and it didn't make sense to store my laptops flat. This had the best reviews. Seems very sturdy and comes with its own Allen wrench to adjust the width for a given laptop. Fit my laptop with no adjustments needed. Has not tipped over yet, haven't checked during an earthquake though. I guess I could jiggle the table really hard but I kind of don't want to. ANYWAY. Quality item, does what it says.

(Honest, non-sponsored review from daily user)Feels sturdy and heavy: The weight of the base feels robust and I feel assured that my laptops or items placed will not fall.Adjustability: Product is easy to adjust and tailor to your laptop size. I fit a large 15" HP work laptop (seen in picture) with no problem. It sits comfortably in place. I have also adjusted the second slot to fit my smaller 13" Macbook Pro, so you can adjust both slots to different sizes depending on your device.Color and quality: I like the shine of the dark grey colorway. The exterior does not look/feel cheap.Overall impressions: I like and advocate for this product as it has instantly improved my WFH setup. I can store my laptop away and keep a cleaning looking workstation. I'd buy again if needed!

I like this notebook stand a lot. It appears well-constructed out of what appears to be aluminum, has rubber linings inside the holder pieces themselves to prevent marring your notebook/laptop and on the bottom to prevent sliding, is highly-adjustable without having to use various sizes of inserts as other products of this nature I've tried in the past require (what a waste of rubber in my opinion), it's sturdy, and looks like it will last basically to infinity.I use this to hold my 2015 11" MacBook Air that I essentially use as a desktop computer until I need to take it with me somewhere, and it adjusts down to the quite-small size needed to hold it securely in place. This stand can also accommodate much thicker laptops with ease, so if you don't have something as thin and light as a MacBook Air, rest assured you can still use this stand with confidence. Standing upright on the very back of my desk behind the 32" curved monitor I have connected to it instead of lying flat on my desk frees up a considerable amount of workspace, and looks cleaner - which was the whole purpose of buying this stand.HOWEVER: what I do not like about this stand is that in order to make the adjustment needed to hold your particular brand & size of notebook/laptop, you have to work 4 hex head screws on the BOTTOM of the stand to loosen/tighten after sliding the pieces apart or together to fit. This was not well-considered, especially if anyone has gone through the process of trying to hold the laptop upright in the stand, hold the two sliding pieces together tight enough against the notebook to prevent sliding back, AND trying to screw in the 4 screws all at the same time. This should be a one-person operation (and with a bit of cursing and trying a couple of times to accomplish the goal, I finally got it), but if you want to avoid some frustration, have another person holding the notebook for you while you fiddle with adjusting the stand.This juggling act could have been avoided if the designer had simply put the locking screws ON TOP of the stand instead of the bottom - but then the aesthetic of smooth, clean pieces of aluminum would be lost, I suppose. All I know is that a small tweak in this stand's design would make it a true cinch to adjust and put into use as opposed to what the process is currently. I deducted a star for this.Overall, I'm pleased with the stand. It functions well, it looks nice, it's unobtrusive and solidly-built. Considering the options on the market today, I'm pleased I decided to relieve my other stand of its sadly-executed duty and put this particular stand into service. Should I require another one for my other laptop, I will purchase this one again without hesitation.

I will update after a while, but initially it seems like it will work well. I use it for my ThinkPad X1 Extreme 2 which is wide, and so ~4 inches of it extend beyond the holder on either side. If they made a longer one I would have gotten it, but it seems sturdy enough. It came adjusted at nearly the right width and I left that as it is, so no info yet on the adjusting screws.

I initially thought it might be rather flimsy but was willing to give it a try. I was surprised at the weight of the stand - it's actual metal and not some heavy plastic. It is very sturdy. The "sides" are easy to adjust and maintain their position without having to constantly retighten the screws. My laptop fits well and there is no scratching from the stand. I would buy this product again if needed.

Fantastic product that I've been using for years. Highly recommend this, however the setup is more finicky than I imagined.

It provides a heavy base. Stable!

I have a Dell and a Macbook laptops. The Windows Laptop is connected to a large screen 24/7.Mac is the one I use when I move around, so I wanted to have a stand which can hold 2 different size of laptops and easy to pick up and place.This product is perfectly match with my requirement and it comes with a spare screw, too.I'm very happy with this product.

Perfect design for holding two laptops of difference sizes. Very sturdy, well engineered and looks stylish on the desk. Only very small negative was it was little finicky to adjust the slot sizes for the laptops, but once I got it right it was set and forget.

I thought it would be too small for my ginormous laptop, although it is very stable and premium feeling.