VIVO Electric 71 x 30 in Rustic Standing Desk, Memory Height Adjustment, 1B Series, Vintage Brown Top Black Frame, DESK-KIT-1B7N

The media could not be loaded. I picked up the 71 x 30 inch VIVO standing desk and have been using it daily for both work and gaming: it’s been phenomenal.Assembly was surprisingly easy; the instructions were clear, and I had it up and running in under an hour solo. Definitely one of the more straightforward desk setups I've done.The surface area is massive: plenty of room for dual monitors, speakers, and more, with space to spare. It pairs perfectly with the VIVO XL desktop mount, which I highly recommend for anyone running a multi-monitor setup.If you get the black colored one, it is a magnet for statically charged nonsense like Styrofoam, so wipe it down after setup.As for stability: this desk is rock solid. If you're casually typing or moving around, the desk doesn't budge. If you're aggressively banging on your keyboard or thrashing a bit (we've all had those gaming moments), your monitors might wobble slightly; but that’s more physics than a flaw in the desk. Even then, it’s incredibly sturdy and comfortable compared to other adjustable desks I've tried.The height adjustment is great, super easy to set memory settings and it adjusts smooth.If you're on the fence... don’t be. This desk delivers in every way that matters. This gives Secret Labs a good run for their money, especially considering this price point. Don't cheap out and get the 60 x 30, send it on the 71 x 30, it is sooo worth.

*Husband review*Sent this to Seller on JAN-26-2024:"Sharp edges observed at leading edge of panel joining. Recommendations for safety & level:(1) Full-length joining channel at front & rear instead of four short channels. Middle panel least support - continuous passive/active downward load with resting hands on keyboard.(2) Thicker gauge screws for joining channels, need better grab per above.Otherwise.. very nice, very quiet desk, good price."Assembly was fairly easy. The only challenging aspect was setting the leg width AND drive rod simultaneously. Otherwise, you should have this together within 2 hours, max: 30-45 minutes for the frame, and the rest of the time putting the top together, placing it on the frame, and situating the desk. A cordless drill with a low speed/high torque and torque adjustment dial will make this even easier. You just need one #2 Phillips and one Allen wrench bits to get this done. No hammers or other tools needed. They made it very simple especially with having the motor already mounted. Great instructions, too.The height adjustment is surprisingly quiet and VERY smooth. You have four programmable pre-set buttons with a manual UP and DOWN button. The lowest possible setting with the provided casters is a typical sitting desk or dining table height. So, depending on how you prefer to elevate your hands/arms for typing and using your mouse, you might consider an undermount keyboard/mouse thingy. It feels like the desk can be manually increased/decreased by 1/8" increments -- you really should have no issue finding the right height for you.The frame has substantial enough weight to keep the top from feeling the slightest wobble. This was my biggest issue with my prior desk -- if I bumped it during a video call, it would wobble and look like I was having an earthquake.And the top is substantial enough to mount reasonably weighted items underneath. Not just baskets and tracks to hold cords and surge protectors, but PC mounts if, again, it's reasonable. Make sure your screw length won't penetrate the top surface. For what you set on top the desktop surface, follow the manufacturer's limits for combined weight.The frame box includes two of these cord holders. When mounted, they're out of sight - out of mind, so.. I don't have a use for them, yet! But I suppose they could hold headphones or a corded earbud/IEM. Maybe a few cords, dunno.I got the 32"Wx63"L unit. In hindsight, I might have gotten the longer desk (73" I think) because my old desk was sort of L-shaped, but I'm using less equipment now that I have a KVM switch for my 2-PC / 2-monitor set-up. So I should be good to go.UNRELATED TO THE DESK ITSELF BUT CRITICAL TO KEEP IN MIND.. Just be very clear AND CAREFUL when setting up your cable management, accessories, and living beings stored/visiting under ANY sit-stand desk:- My PC is on a standalone cart just inches from the floor, under my desk to mitigate sound/vibration issues. I had to ensure my HDMI, DisplayPort and USB-3.0 cables (A) were long enough at the DESK'S MAX HEIGHT position AND MONITOR PLACEMENT and (B) didn't cause a trip hazard since there's a walking path along the backside of my desk. Be mindful of the absolute max-height needed where all your connections occur. The last thing you want is to proudly sit at your new desk, press the button for max height, hark! the herald desk rises to glory, annnnnnd your monitors (assuming on stands and not mounted on arms) get ever so slightly tilted then violently pulled back only to plummet to their demise.- I have two large speakers and my PC tower/cart under my desk. I had to make sure at the lowest possible position, the motor would not crush/break or otherwise come in contact with the top of those items. Luckily, the speakers are ~3" away from the bottom of the motor, and the PC is set on the outside, between one of the legs and the wall. If you keep a filing cabinet or some other accessory under the desk, be aware of all elements under the desk's structural components during set-up.- Goes without saying.. Watch for small children and pets when raising and lowering the desk. When the desk achieves the lowest point, there are likely pinch points at the base of each leg.

Hi - I literally searched Amazon for months, read reviews and finally decided on something that wasn't going to take me hours to put together. This 60x30 Vivo desk was the one! I work full time remote, needed something to sit/stand due to serve back issues and got this one.Shipping - arrives in two boxes and they are pretty banged up by the time they arrive due to the weight of the deskUnpacking - even though the boxes were damaged the desk was not at all, even the tops were fine (I was skeptical)Assembly - mind you I've put together IKEA products before, this was very easy to assemble. I'm 5.4 female and the toughest part was flipping it over and then back over and moving it around on the carpet. Took me no more than 2hrs due to the weight of the desk, not the difficulty.Functionality - moves up and down extremely smooth, is very solid. Supports my 3 monitor arm holder and no issues at all with wiggling. Support is fantastic.In summary - if you are willing to pay a bit more, work less on assembly and want a very sturdy, good looking desk - this is the one!

I recently purchased the Vivo Standing Desk (43" in white/white), and I couldn't be more pleased with my choice. This desk has truly impressed me with its quality and functionality.First and foremost, the desk has a great weight to it, which adds to its stability and overall sturdiness. It doesn't feel or look cheap at all; on the contrary, it has a premium finish that complements my workspace beautifully. The motor on the desk raiser is a standout feature—quiet and smooth, it adjusts the desk height effortlessly.The assembly process was straightforward and hassle-free. It took me about 45 minutes to put everything together, and the instructions were clear and easy to follow. The picture drawings for placement were particularly helpful, making the entire setup process smooth and efficient.Overall, the Vivo Standing Desk is a fantastic addition to any workspace. It combines style, quality, and functionality in one sleek package. Highly recommended for anyone looking to upgrade their desk setup!I did also accidently order 2 desks (by mistake i.e. added to my cart too many times); their customer support were very friendly, professional, and helpful and assist me quickly with how best to return. Great company too!