Noico Green 170 mil 18 sqft Car Waterproof Sound Insulation, Heat and Cool Liner, Self-Adhesive Closed Cell PE Foam Deadening Material (1/6'' Thick Sound Deadener)

Very easy to work with and you get a lot of noise reduction for minimal weight added. I put this on top of the butyl vibration deadened and it reduced the sound eco inside the door. I tested by speaking with my head inside the door before and after -ad it was a very noticeable differences. Great stuff for the price any much less work to install than the butyl deadened so you have nothing to loose to add this on top to get better results.

When you put this over the sound deadener, it really makes a difference and adds insulation at the same time. Easy to work with. Cuts easy with household scissors. Sticks good too. Just don't try and apply when it cold outside. Warner temps work better.

This stuff was used i n my 2005 Chevy Silverado on the roof/headliner and the floor and both doors. The floor and door installation was over butyl backed 80 mil dampening material. The adhesive on this stuff is good and it's flexible enough to be pressed/rolled down over sheet metal contours. My research indicated butyl rubber backed aluminum sound deadening with a final layer of this closed cell foam would be a good configuration. My trucks rode quality has improved noticeably.

My on board generator box on my brand new toy hauler was not insulated. It was just a light aluminum box with some decorative wood around it on the interior, right under the master bed and it was loud. I removed the generator and started with the Noico Dynomat material first. I installed it on all metal surfaces and used the Noico tape and roller to finish the installation. To add a extra level of dampening I added the closed cell foam layer over it, rolled it out, and finish taped it. I think i cut at least 30% of the noise and vibration out and this product was much cheaper than other name brand products. Would use again for sure.

I found this product easy to apply and work with. I applied in cooler weather 60 degrees. I would suggest that applying in warmer weather will make the adhesive less forgiving and more sticky. I applied this product to a vehicle ceiling and have had no issues with drooping or lack of staying adhered. Most importantly, it is knocking down the heat in the vehicle. Very good product for the money!

This on top of some KilMat worked wonders on my old car. So much more enjoyable to drive with significantly less road noise. Used this in the drivers and passenger floor, have a little left over that I will cover the rear wheel wells with

Very easy to use and apply, adhesive is very good. Cuts easily with good scissors. Made a huge difference in my doors. I applied this over noico 80mil sound deadener, which also was wonderful.

I used this product to line the floor and quarter panels. The product was as thick and adhesive as expected. The paper to reveal the adhesive was easy to remove and install. Trimming this material was simple with a simple razor from a window tint kit. So no real special tools needed to install this other than a roller I received with another sound dampening material. Cleaning the surface prior to installing is a must, just as insuring the surface is dry enough for any adhesive to adhere. I would recommend using a heat gun to expedite the drying process but be cautious not to melt the product.