HAPPYGAME Fabric 350lbs Gaming Chair seat,2D Height Adjustable Armrest Computer Chair, Video Gaming Chair and Seat Height Adjustment Chair（Grey） OS7206

I am very impressed with this chair.Overall, it has a great feel to it being that it is cloth. I am 5'6 and 155 lbs. The back on my head hits the pillow in the right spot. The arm to recline is small, but not to small to use. It's not going to get caught by things as you roll around. The chair locks into positions for the recline function and the mechanism under the chair, that raises and lowers the chair, can still be pulled out to unlock the base and allow it to rock. This was a requirement for me with how I sit at my desk. The 2 arm rest are easy to manipulate up and down along with the rotation inward and outward.Assembling the chair was straight forward. The instructions were more than adequate. They included the tool that was needed along with 1 extra of each screw and washer in the kit. They even included gloves that I didnt use. Real men dont use gloves... Haha... I used the provided tool to assemble instead of going out to the garage to get my tools. I did it to see if I would experience slipping of the tool or any sloppy fitment between the tool and the screws. No problem there. I did have some reservations because I couldn't see any threads in some of the screw holes. I saw some slight rust on the metal inside the screw holes. Most likely from water based coolant being used in the manufacturing process. Not a big deal in my mind. The screws went right in and didnt strip. Again, I used the provided tool. I did tighten them very tight. I have a tendency of stripping things and somewhat expected that I might. When it didn't happen I was presently surprised and gave myself a pat on the back.Once everything was together, I parked my rear in it for a couple of hours binge watching Season 3 of Man in the High Castle on Amazon Prime. I was comfortable the whole time. The only thing I think that could possibly be changed a little is making the head pillow reversible. I can see the white stitching getting dirty over time. The backside of the pillow has a zipper in the center of it. Not sure if the design could be to have the zipper on the bottom to allow the end user to flip it around if they so choose. It's an insignificant gripe for most. Even for myself, that's getting to be a bit picky. One could complain that it was missing a small plastic piece on one of the 1st instructions on page 1, but it looks like the base was changed from the picture on the instructions. It was just a cosmetic piece for the base of the chair. The base is all smoothed metal and I didnt see how it would work with the base I have after examining the picture closer.I specifically wanted a chair that could blend in at my office. The other color for this style is red. Way too flashy for an office environment. I waited for this color to be released. So glad I did!If you are on the fence, I recommend this over the fake leather seats. I see a lot of users complain about the heat that develops because the memory foam combined with the fake leather causes the users legs to sweat. This one being fabric allows the chair to breathe and no sweating occurs.I will be using this chair daily for up to 8 hours straight at a time. I will update this review as time goes on. I spent weeks looking at all of the offerings on Amazon before deciding to wait for this color to release. It is hard to sit through all of the options.Long term review in process.Update: 5/11/19 - I've been using this chair for work daily for long periods of time. The only change I have done was order a headrest pillow for a car. It has an elastic buckle that allows it to be fastened around the center sections holes. I did it for upper neck and head support. I still love this chair even today.Forgot about another change I did. I also swapped the wheels with the roller blade style wheels. Much easier to roll around and the floor stays damage free. Win/win!Update 2021/07/19: Still comfortable all day and still looks great. One of the best Amazon purchases I have ever made! Just ordered a replacement gas cylinder. I always sit in the lowest position. I went to raise it, and it wouldn't go. Tilted the chair on its side and manually pulled the base to extend the gas cylinder. Sat the chair up right and it sank to the lowest position.. Not sure how long it's been non-operational since I've sat in the same height for so long. Not an expensive fix. Under $30 for a heavy duty 500 pound capacity replacement cylinder. I have added a better lumbar pillow as well.

I'm a big dude. 6'2" and 320 lbs. This chair is nice and wide and deep too. I replaced the wheels with some rollerblade wheel type casters so I can't comment on the default wheels, but it rolls well with the ones I have. It is comfy for long periods of gaming at my desk or watching other streamers.

Ordered this chair when my previous chair's caster broke. As a writer and artist, I sit a LOT and was looking for something sturdy and comfortable, and that had a back that could be adjusted (previous chair's back was at a slight angle, meaning it provided no support when I was sitting upright at my desk to draw). I chose this chair because of the weight rating, steel frame construction, adjustability, and removable support pillows.The chair just arrived yesterday so I'm not sure how it will perform in the long-term, but so far I love this chair. I assembled it by myself in about 40 minutes using the included tools, and appreciated the included gloves to keep my hands clean. I was missing one piece, but it was just a cosmetic piece that went on the base of the chair so I assembled it without worrying about that. The hardest part was attaching the arms to the chair because I couldn't get the chair to sit at a good angle without some fighting, but I managed it.So far, I find this chair to be comfortable to sit in, and it's stylish and looks great in my home office!

I revived the chair with a piece missing and therefore can't even start to assemble it. Can't find any wad to get a replacement other team sending the whole chair back. Very frustrating

Solid construction and quality chair for the price. It’s heavy and tough to assemble but I will take that any day with how good quality it is.

Thank God they ship to Hawaii. I've had this for months now and it holds my weight. Im 5'5 170 lbs. Seat is comfortable, even better if you get those chiropractor chair cushions. This also holds my friends weight of 230lbs as well. im a casual gamer so gaming from 3pm -10pm, my butt and back doesn't feel uncomfortable. Quality wise, you get what you pay for. Nothing bad about the parts and setup was pretty easy. Just use a power tool to speed things up. Id buy again for my office and as a gift.

Have my had it long, 5 weeks, but its a really good chair and it does look really sturdy all around

Well worth the money. The chair is very comfortable, the frame is made out of all metal. The padding is stiff but not too stiff to be uncomfortable. I can see my self being very comfortable in this chair for long gaming and editing sessions. The one down side to the comfort of the chair, which is more personal preference, is that I wish the base was a little wider. I am a larger guy and the seat sides do dig a little but they should loosen up over time. Putting the chair together was pretty simple, follow the instructions and you shouldn't have any issues. Took me about 30 minutes maybe. The only thing that I had an issue with was the tool they give you. It gets pretty tight when you are putting the attached base on. So if you are looking for a great Christmas gift for that gamer in your family, this should be a buy for you.