unhoCorner TV Bracket Tilt and Swivel TV Wall Bracket Articulating Arm Full Motion TV Mount for 32-65 inch LCD LED Plasma Flat Screens Weight Load up to 110lbs Max VESA 600x400mm

I wanted a wall mount on an external corner in our lounge which would be strong enough to take our TV, sound bar and also be extended quite a way to the side and could withstand being moved around quite often.The wall mounts are very substantial 15cm x 17.5cm and come with mounting screws and wall plugs.To fit it, I found that putting a screw in one of the wall mounts and then levelling up the other mount on the other wall was the best tactic. I then marked where the holes were needed and drilled the holes and mounted with good accuracy. Out of the box, the arms are very tight and hard to move, but this actually helps prevent any sag. If they are too tight, you can always slacken slightly as the nuts are nyloc nuts and shouldn't come undone. Seeing as you can pay hundreds for wall mounts, I think at £48.99 it was a reasonable price to pay for such a substantial mount, even if our TV is only 50".

At first it looked a bit flimsy but once assembled it is pretty sturdy. Once it's on the wall it is solid. I have put an old 42 inch plasma on the wall which is much heavier than modern tvs and it is holding up well. Most importantly is getting a good fixing in the wall.Once tv is on the wall you need to tighten the screws at the back to secure the tv to the bracket, this requires a long screwdriver as the gap between wall and tv is not enough to get your hand in .But yes , not necessary to spend a fortune on a tv bracket as this does the job well .

I think its decent value and does the job fine, but there are a few problems that make life more difficult that I haven't had in the past with more premium brackets. First the bottom screws that lock the tv to the bracket cant be done without a very long screw driver if you are mounting your tv slightly low on the fixing mounts, also you cant tighten the tilt mechanism lock nuts as they hit the back of the tv so you have to set the angle lift the tv off the bracket, tighten them then put it back on the bracket. Still these are not major issues and I am pretty pleased with the results.

Worker's perfect

Used this bracket to put up my Samsung 75" tv, it was easy Ince I knew the height ti go with , however it only came with 8 8/10mm screws but they were good size , but just for peace of mind I added additional screws but as my tv is 68lbs it's holding just fine, great choice , this bracket held me and im 16 stone ...fantastic buy

I bought this for the mother in law to mount her TV in the corner of the room to free up some space and keep the little ones away from it. The kit itself is well made and I could basically swing on it once it was on the wall. The fixing kit that it came with had all the parts but I needed longer screws for the TV and had to get some more machine screws. The fitting was straight forward, I just needed to place the bracket feet on either side of the wall to mount it.

We looked for ages for a good TV bracket and when we searched our model some were coming up for over 200 quid!Easy to install (bear in mind i am a carpenter so i may be talking through just experience here) i was worried about the weight of the tv as we have a 65 inch Model but it holds the weight just fine, you can also adjust the angle so you can put it up higher on the wall. WORKS GREAT!

Sold as a corner bracket suitable for mounting up to 65" flat screen televisions. This is incorrect as it will not even mount a 55" across a corner wall. Have reported this to Amazon but have not had any response from them or the supplier.