EcoPoxy UVPoxy Table Top Coating & Art Epoxy Resin Kit - 33.81 FL Oz / 1L: Fast-Curing, UV/Yellowing Resistant, Water-Clear, Bio-Based Resin | Self-Leveling, High-Gloss Epoxy for Table Tops & Arts

I have been using Ecopoxy for months now on small projects and it is reliable, mixes well and has a long set-to-cure time. It does like 70+ degrees, and can be counted on to be workable for many hours after mixing, so be sure your project doesn't leak. Otherwise, 3 days later it is set and ready for finish sanding.

I’m not the type to ever write reviews .. but this is the best resin i’ve used to date. Its CRYSTAL clear and it adds a nice thick layer to my work. I was nervous at first because the resin without the hardener seemed super thick .. but I ended up LOVING the results in the end! 10/10 would recommend and seems like the only resin i’ll be using moving forward.

This resin is advertised as eco-friendly, and it is said that you can work without a mask, only needing gloves. However, the hardener has a strong, pungent odor. Even in a well-ventilated room, this awful smell has lingered for almost a day! Despite wearing gloves, my hands developed an allergic reaction, and now I'm itching all over. I can neither return it nor get my money back. This resin is expensive, but I can't use it.

Used for my river table bar top after pouring with the deep pour . Worked great, just follow directions, mix very thoroughly and don't scrape out the last drops from bucket, just pour out. If you scrape out the mixing pail you may get some unmixed that will not properly set.

I used this for the my first resin project ever.And it turn out great the miss ups in it are my fault for first time but works so well. Just mix 50/50 and pour. I used powder color and still worked perfectly

Overall it's fine. It just seems to turn a little yellow after curing. I made sure I followed the directions and did several small batches but they all had a yellow tint to them. Not a problem if you're adding color but disappointed if you're looking for something clear.

Amazing stuff. Cures fast and hard, very durable. Follow the instructions and mix very, very well to avoid pebbles and airbubbles in the final coat.

This product mixed up to the consistency of rubber cement. I followed all the directions. It just does not flow well enough to do table top type work. It might work for other applications. I had to sand it all off after it set up and then use a different product. I have used other Eco Poxy products in the past that have worked fantastic but not this one.