Anker iPhone 6s Plus Case, Ultra Protective Case with Built-in Clear Screen Protector for iPhone 6 Plus/iPhone 6s Plus (5.5 inch) (Gray/White)

Very satisfied with the level of protection. I originally used a Tech21, then UAG Urban Armor Gear Hard Shell Case for my iPhone 6 Plus and was very happy with them, especially after applying the clear screen protector. However, after buying a 2 piece protector for my child's iPhone, I realized that I wanted a little more protection for the face of my phone. I agree with the other reviews that the plastic screen protection on the Anker lacks a quality feel, so I also removed it, but I kept the clear screen protector that I applied while using the UAG. I now have the best of all worlds. I read the review that this case is uncomfortable to hold to your face, but I don't agree. All said and done, this $15 case was a super buy and I am very happy.Update: During a phone call, I shifted the phone downward and was surprised by the feel of an 'edge' against my ear. Not sharp, per se, but definitely the edge of something. The manufacturing process can leave a very slight, barely visible ridge on the highest part of the outer shell, thereby causing an 'edge'. On mine, it only existed in certain areas l, but not others. I found that running my finger nail over the extra plastic / edge pushed it down. Over time, I expect it to totally disappear and I'll be left with an inexpensive, excellent case without any reason to complain.

Heads up! If you have gotten spoiled to using a PopSocket, you will not be able to use it on this case because of how the back of the case is. But as this is not a dealbreaker for me, I LOVE THIS CASE. My phone is ultra protected but at the same time it also didn’t add too much to the thickness of my phone. There is a bit of bulk added to the edges making the phone a touch wider, but it doesn’t bother me a bit and I actually enjoy the added grip. The case has a great texture, not too slick or too sticky. Very easy to hold and use. I’ve never been big on built in screen protectors but this one is really pretty impressive. There is no plastic tick sound when I touch my screen like I’ve experienced with some built in screen protectors and it also doesn’t take away from the touch sensitivity of the phone which obviously makes me happy. Lol. Overall a very good buy and one I would recommend to others (already have actually, and my sister is now going to be ordering one shortly).

I did not write a review when I bought the phone because I really had nothing to say other than its thin and not big and bulky like other phone cases. I have used this particular case since I purchased it in November 2017 and other than the case being a little dirty, this case was perfect!! I probably drop my phone at least once a day and I don’t have a scratch or a crack. My phone looks brand new when I take it out of the case. I hope there is a case to fit all iPhones when I am forced to upgrade to another phone bc I don’t need a fancy case. Btw, I have washed this case with dish detergent and warm water and pat it dry several times, but it’s time to purchase a new one bc I want a cleaner looking case.

I really like this case after making some modifications. First, I tried it with the built-in screen protector which seemed like a good idea. But there were always rainbow swirls all over the screen. I'm sure this was caused by the stuff they put on the screen to prevent finger prints, but no amount of cleaning both surfaces made this any better and I was really missing the beautiful screen I paid so much money for. I finally decided to remove the built-in screen protector.Some people have asked how to remove the protector. I found this east to do by inserting a pair of scissors into the cut-out hole for the home button and cutting the clear protector straight up the middle all the way to the top. Then just stick your fingers in the slit you cut and pull, starting at the top. This gives you sufficient leverage to pull it off and no damage occurs. Move your hand as you pull it off to provide support to the case. The adhesive remained on the clear protector portion so there was nothing to even clean off. (Obviously, remove your phone from the case before inserting the scissors!)Next, I applied an  iPhone 6s Plus Screen Protector, ArmorSuit MilitaryShield - Apple iPhone 6 Plus / 6s Plus Screen Protector (Case Friendly) (5.5") Extreme Clarity Shield with Lifetime Replacement . I love these because you can move them around until they are set perfectly and it finishes up perfectly clear and you see beautiful HD graphics on your expensive device. :) No worries getting the case to fit back on with this screen protector, but it is not glass.The last modification I made was to cut off the charging port cover. I don't necessarily recommend this for everyone though. I put my phone on a charging dock and I just found there was way too much hassle getting it on the dock with the cover. I just used an xacto knife to cut the piece that flips back and forth. I had my previous iPhone for more than three years and I never had to clean out the port, unlike my husband who keeps his phone in his pocket. So I had no qualms doing this since I transport mine in a smooth lined, lint free pocket in my purse. If you charge using just a cable, and/or you put your phone in cloth pockets, you may not find this modification useful.The last thing some may find useful to know is that you probably cannot use charging docks with this case on your phone. I have a  Sony ICFCS15IPN Lightning iPhone/iPod Clock Radio Speaker Dock (Black) (Discontinued by Manufacturer)  and the charger piece was not long enough to make contact with the port. This has been a problem since my last iPhone too. To resolve this without removing the case every time I want to charge, I use a  CableJive DockStubz Female Lightning to Male Lightning Case Adapter for iPhone 7 / 7 Plus / 6 / 6S / SE / iPad Pro and all Lightning Accessories - (LDOCK-STB) .I have had two very minor drops with my phone since having the case, both times less than 18 inches and onto an area rug. So these weren't the greatest tests of the case, but I can report that the phone and case did just fine. I don't plan to do any more testing on this front, but I'm sure it'll happen by accident and I can report back or you can check some other reviews for that.

Loved the look, was easy to follow directions. Husband has one for his iphone6 in black and I loved the white one for my 6+. Went on easy enough...... but then, I had trouble using it. Had to push really hard. Showed my husband and his screen isn't as loose as mine. Don't know if I got a bad one or not... but it isn't worth it. Going to have to leave it on my phone until I order something else!** I have decided to edit this... after posting this review, ANKER contacted me. They sent me a replacement. They have been in contact with me the whole way. So first the costumer service is wonderful!! The one I had had to be defective. This new one works fine. I do have a cover on my glass and I think that does interfere with it once in a while. But I am thrilled. I think because of the size of the 6+ the film could be a bit tighter, but I am willing to live with it because the case is great!! Kudos Anker!!

Purchased as a present and is currently in use with good results. A very simple but effective protector for an expensive handset.

It gives the phone a better grip and protects the phone very well.