⚙️ Power your pneumatic systems with precision and speed!
The TAILONZ PNEUMATIC 1/4" NPT Solenoid Valve DC12V is a pilot-operated, 2-position, 5-way valve designed for fast and reliable pneumatic control. Featuring a robust working pressure range of 25 to 116 psi and a temperature tolerance from 32°F to 140°F, it offers quick response times of up to 4 cycles per second. Its standard 1/4" NPT ports and included fittings ensure easy integration into professional pneumatic setups.
N**K
Made my train horn s
Needed for an air horn air relay, works great!
R**S
Great product.
Great product
T**M
Value
Outstanding value
C**S
Make sure you understand which size you order. Physical sizes vary.
I figured that 1/8" ports would be better for small cylinders, but it was a BIG LITTLE surprise when the 1/8" version was half the size of the 1/4 valves I'm used to. A 6-32 screw is too small to mount the 1/8" valve and the holes don't line up with 1/4" valves. I will send it back and use all 1/4" valves so they can be mounted in a stacked configuration. The 1/4" version will allow a common size screw to pass through the mounting holes....I didn't remember if it is 6-32 or 8-32 but one of them fits. Anything smaller is uncommon in sae sizes and for my use. The pictures seem to show the dimensions, but I assumed they were the same.....my mistake. The valves I bought in the past from this brand worked great, so I reordered the size I wanted.
V**N
Talons pneumatic with wire outlets.
For all the People the product is 100% recommendedThanks to AMAZON.
E**N
Terrible
This is disgraceful the pneumatic valve I got had no cushion whatsoever and was missing ALL THE FITTINGS. The wires were also cut too short to use adding insult to injury. I Understand that what I ordered was used but the disregard and uselessness is infuriating.
R**O
Easy to use
This brand is nice to use. It doesn't extend and stay, unless it remains switched on. When turned off, it releases and the cylinder returns to starting state. I would call it push release. They are easy to use. Some cylinders may require buffer tank near by.
E**E
Needs Quality Control
Of the two I received, one LED was not soldered on completely, so the LED did not light up. Easy to fix however. Both had the wrong sized exhaust ports - 1/4" NPT instead of 1/8" NPT. Since I needed these and did not want to wait, I had 1/8" exhaust ports on hand to use. The 1/4" exhaust ports will go in the parts bin for another project.There are also 3 wire connects, and no indication of which to use. I tried the two that were near each other and that worked. Unsure of the purpose of the 3rd connection.
Trustpilot
1 month ago
1 month ago
