Optoma HZ39HDR Laser Home Theater Projector with HDR | 4K Input | 4000 lumens | Lamp-Free Reliable Operation 30,000 hours | Easy Setup with 1.3X Zoom | Quiet Operation 32dB | Crestron Compatible,White

I have been eyeing up this projector for some time. I had a BenQ about 4 years old which was a great machine, but I had to replace the lamp a couple of time. I always felt that I could not get the brightness I was looking for so I decided to make a purchase for this machine. Some of the reviews I read were not that great, so I took a chance. The quality of the viewing has increase dramatically. I thought I was good at 30K contrast ratio, but now I am at 1Million contrast ration. In fact, it was so bright that I will never watch a regular TV again as I cannot tell the difference. It's so good that I had to write a review. When I first got the package, I immediately hooked it up where my other projector was connected. I have an excellent sound system in my movie room, but I wanted to keep my budget low, but not too low. I had to make several adjustments as there was a pink spot on faces. It took several hours to really calibrate and learn the different settings. The settings that seem to be perfect are Display Mode Cinema, Gamma set to Film, Brilliant Color set to 5, Sharpness to 11, Color Temp to Cool, Brightness Mode to Constant Luminance to 85%, Wall Color Off as I have a built my screen with a nice painted very light grey. I used the same setting for gaming which are perfect. Watching football is like actually being at the game. Nothing beats great sound and an amazing picture. The picture above do not do it justice. For a low budget solution, then I highly recommend. One thing I was concerned with was the heat dissipation that others were saying, but does not seem to be an issue. I use roughly 5 to 8 hours a day.

Very good projector! 5 years of constant use and it's still going strong. For the cost, this was a really good purchase. I would definitely buy it again if this one ever goes to a poor quality. I had a bulb projector before this laser projector and I will never go back.

TLDR: Do not buy Optoma productsHZ39HDR 4,000 Lumen laser model - Using HDMI #1 which supports 4K input cycles through all input sources, briefly flashes content when its back on HDMI1 then loops over and over. This can take 15+ minutes and does not happen with HDMI slot 2. Receiver and cables all support 4K and locking the input to HDMI 1 only still goes through a input looping cycle. Input loop happens with AV receiver or if plugged into UHD blu ray player directly, various copper and fiber HDMI cables as well.No firmware updates since release, the Crestron interfaces still requires Adobe Flash to use.Non existent support, was told to perform a factory reset then RMA if issue remained.1 year warranty on a $1,100 projector released in March of 20201/11/2021 - Purchase Date7/24/2022: Update - I have a solid dead white pixel near the center of the screen. It appears from the projector itself with zero HDMI cables plugged into it, over top of the menus and scales when zooming in and out. Replacing projector with a ViewSonic (PX748-4K)

I use this projector for my only source of TV and have been using it everyday.Pros- picture quality is good and you can see the picture without having to shut off the lights.Cons- it's not wireless or Bluetooth capable! I have owned another projector in the past that was cheap and that had both of those. If I would have known I couldn't hook anything wireless to it , I would have not purchased it.If you are using a firestick then you can hook the speakers to that. Sound is not good and you will absolutely need a set of speakers.I wish the keystone settings would allow you to have it off centered such as a corner so you don't have to have it right in the middle.Overall it's a great product but know your setup and make sure that works with you. I am with other people on it does check all the boxes but also forgot to check the basic ones. I still give it a good rating because at the end of the day it's giving me a good picture quality

I have been taking this projector through it's available options for the last month. I installed my projection screen on my north wall and I was pleasantly surprised that even with a window exposed on the south wall, I was still able to get a very usable image. We normally watch this with the recessed ceiling lights and the wall sconces set on their most dimmed setting. There is no need for complete darkness in the theater. With all the lights off, this projector still lights up the room by itself. I love the amount of zoom available. It makes it a lot easier to get the perfect picture size. There are several image settings to choose from. The Presentation and Bright settings are great when the room is more well lit. I have used several of the other settings for different shows and movies we are viewing. I love that I was able to set the User setting to my desired image. We have a 135 inch screen from Elite Screens and they are a perfect combination. The only thing I have not tried is 3D, which I currently don't have a 3D source. I'm anxious to see how that will look.