EPAUTO 2 Pack-CP285 (CF10285) Replacement for Toyota/Lexus/Scion Replacement Premium Cabin Air Filter includes Activated carbon

Extremely low grade. the fabric that makes up the filter is only about 1mm thick. The fabric in other better quality products is over 3mm thick and three times weightier.

Looks to be decent quality for the price. Much better value compared to dealer price.Fits like OEM. I would buy again.

Fits great as advertised. Awesome value.

Fair price for 2, fits my Camry '07 perfectly and seems a lot higher quality than others I have bought.

Great cabin filter for my Range Rover Sport.There are two sides to these filters; coarse and fine. The coarse side is darker, and should be UP when installed, so any carbon particulate is captured by the fine side, which is whiter, and on the bottom.Installation:In the RR Sport, with engine running, in Park and e-brake applied, turn interior fan on LOW. Turn AC off.Open glove box and put stuff on passenger seat(or it will dump!). There are two flanges on the sides of the glove box. Look for them and you'll see how they work. Depress them, and the glove box will swing past it's open position to expose the cabin air filter compartment.Identify the Recirculation button on your climate control. Its an SUV shape with a circular arrow. put your finger on this, then look at the cabin filter compartment and press this button. You'll see the grey diverter panel swing up (it's spring loaded, so it won't chomp your fingers).There is a small black frame with two tabs. Reach in the filter box, push tabs and lift frame and old filter out.pull it up and out, you may have to wiggle it. it lifts out at about a 25 degree angle. Remember the orientation of the box.Squeeze the old filter like an accordion, and it will pull out. Dispose of this. You will notice all the dirt on top. That is because the air flows through it from the top, and that's why the darker side of the new filter goes up.Insert the new filter, dark side up, into the frame. Filter element creases align side to side, NOT front to back.Squeeze the filter element under the tabs on the frame gently, it will settle into place. Gently press the filter into all the corners, so it will seal.Put the filter assembly with your new filter back in the cabin air box just like it came out. Insert at a slight down angle, it will self align, then gently push it down till its snapped in place. It should be level.Press the recirculation button and watch to see the grey diverter panel slowly drop down. if there's an interference issue, just repeat the insert process until it sits correctly.Close the glove box gently to re-engage the open position guides that you pressed earlier. Gently.Put stuff from seat back in box. Congrats, you're done!