Size Name:PLA NX2 ø1.75 | Colour Name:Blue "Extrudr" uses only 100% new PLA NX2 plastic. No admixture of waste material. This is the only way to guarantee 100% high quality for the perfect print. Medium Flow (MF) viscosity allows faster printing with improved printing results. Extrudr PLA NX2 filament has 2x better viscosity than conventional filaments. This allows very smooth surfaces, optimal layer adhesion, high printing speeds and significantly higher printing speeds. Example: the standard printing speed for "Makerbot Replicator 2x" is 90 mm/s. With MF-PLA NX2, easy printing at 110-120 mm/s is possible. Low shrinkage. The PLA NX2 shrinks by less than 0.7% during cooling. Vacuum sealed. Each spool is vacuum welded and supplied with drying granules during the final inspection. This leads to a significantly improved shelf life. High quality, made in Europe. The product is developed and produced in Austria. The colours are 100% biodegradable and are sourced from Germany. Concentricity and shape tolerances. Concentricity and shape accuracy are continuously controlled by laser during production 20,000 /s (both the concentricity and the shape accuracy over the whole roll smaller than +/- 0.05). Technical data (PLA NX2). Recommended extruder temperature: 195-220 °C.
R**N
Good prints, very opaque (good for optical work)
Prints well and does produce a matte finish as promised. It's much more opaque than typical black PLA (SUNLU in my case), so it works well for anything optical.
N**G
Produces excellent prints
This material prints very well on my Flashforge Creator Pro, probably the best material I have ever used. Great for optical devices, as it reduces stray light compared to the glassy black PLA filaments.
L**E
Awful!
Worst filament I ever bought, I have tried every temperature and cooling setting I can think of, I have adjusted the flow but this stuff dosent stick together! layers fall apart, finish is awful. I get perfect resultsa from almost every other filament its not me or the printer, this filament is simply bad. Added to my never buy again list!
K**K
I had layer adhesion issues with the black version of this.
The reel started out well and the finish was nice but after half a roll I started running into layer adhesion issues which could be fixed by upping the temperature but that destroyed the matt finish :(I used it over a year or so, so I'm not sure if It is partially my fault for not storing it well enough but that's my experience of it.
M**S
Very dissapointing
I bought this expecting a premium filament with a premium finish, and I've got to say I've been quite dissapointed, a vase mode print quickly showed up the inconsistencies in the filament width with some layers looking darker than others when a light is shone from behind. The finish is touted as matte, but is nowhere near as matte as filamentives matte pla and more of an off gloss. The white has a bit of a creamy tint too.Print quality aside from the above issues is OK, prints seem to adhere well, but the plastic is a bit sticky so you can quickly empty your nozzle on travel moves leading to gaps on the next line.There's much better filament out there, spidermaker and filamentive definitely do better matte white PLA.
A**R
Doesn't seem to stick to itself very well.
Not impressed. Doesn't stick to itself very well. Layers peel off. Lot's of gloopyness.
Trustpilot
3 weeks ago
2 weeks ago
