VEX 2-Wire Motor 393 with Motor Controller 29

Description

Features No clutches needed Shaft coupler (included) replaces the clutch 2-Wire Motor Ports: Connect directly (Cortex only) 3-Wire Motor Ports: Use with the Motor Controller 29 Can be configured into a "high speed" version Has 60% more torque than the 3-wire VEX Motor The 2-Wire Motor 393 does not have an internal motor controller. Compatibility All VEX Microcontrollers (V0.5 requires use of a Motor Controller 29) All VEX Square Shafts 0.125" (3.2mm) 2-Wire Motor Ports 3-Wire Motor Ports (with a Motor Controller 29) Specs Free Speed: 100 rpm (As Shipped)/160 rpm (High Speed Option) Stall Torque: 13.5 in-lbs (As Shipped)/8.4 in-lbs (High Speed Option) Stall Current: 3.6A Free Current: 0.15A All motor specifications are at 7.2 volts. Actual motor specifications are within 20% of the values above. Motor Controller 29 Specs Max motor stall current: 3 A Max battery voltage: 8.5V (with fully charged 7.2V battery) PWM Input: 1-2ms will give full reverse to full forward, 1.5ms is neutral, 200ms for brake mode (like neutral, but motor terminals shunted together). Brake mode may not be supported by your compiler Input Cables: Black Wire - Ground, Orange Wire - Power, White Wire - PWM Signal Output Cables: Red and Black Wires - Motor Connection Kit Contents (1) VEX 2-Wire Motor 393 Module (1) VEX Motor Controller 29 (1) Inventor's Guide Insert (2) 6-32 x 1/4" Screws (2) 6-32 x 1/2" Screws (1) Motor Coupler (1) Motor Post