Marine Tex RM331K; Gluvit Epoxy Sealer Gallon Made by Marine Tex

Fixed my boat over a year ago still no leaks replaced 50 rivets on the bottomOf my Tracker boat

Awesome product with a great finish.

Gluvit proxy worked great. Purchased a used boat and was leaking at the bow around some ribits and ware it was beached A few times. Used a wire brush on a drill to clean up the aluminum, then coated inside and out 3 coats. Now it hasn’t leaked a drop while out fishing. Purchased the 8lb, Can have enough to use elsewhere. Use a cheap brush this stuff sits up in gas, what was left in the container turned to stone. Very satisfied.

So I bought the gallon container. The container is half full so you can add the hardener. So me having a brain fart put all the hardener in the gallon can. I covered the bottom of the Jon boat with one coat. I put the lid on the can and returned the next day to add second coat and now I have 160 dollar boat anchor. Like I said complete brain fart. So use only what you need. This is a great product I will buy more in the future.

This stuff worked great on the bottom of my flat bottom aluminum boat would recommend to anyone.

Used to seal my pontoons on my pontoon dock. Epoxy seems flexible which allows for flex without it cracking. Goes on clear to hazy yellow. I used a paint roller and that worked well, if you have patients and allow it to set up a little it will get thicker and allow you to fill bigger void using a brush.. set time varies by temp and humidity. If it is hot with high humidity your working time will be less. However you still get a fair amount of working time. I was getting close to 2 hrs working time with it even at 80 degrees F. I did over coat it with 2 coats of flex seal. I will update next year ad I see how well it holds up

worked as expected, boat has not been in the water yet, however will be soon

Very pleased with gluvit epoxy. Glad it did the job I wanted it to do and didn't take much dry time either.Thanks,