EaseLife14 FT Double Door Sliding Barn Door Hardware Track Kit,Basic J Pulley,Heavy Duty,Slide Smoothly Quietly,Easy Install (14FT Track Kit for Double 42" Wide Door)

Contenta con mi producto buena calidad i es exactamente la descripción que ofrecen en línea lo volvería a ordenar

We bought this kit to hang double barn doors on our pantry. Overall, the kit is great and the instructions are clear enough. However, hanging the tracks level requires a great deal of precision as being off even just a tiny bit leads to your doors sliding on their own (we're in a 1950's farmhouse, so nothing about our house is square or level). The doors slide so smoothly that if the tracks are tilted at all, the doors will slide. This is probably true of most barn door kits and not an issue specific to this kit, but beware that if you think hanging this will be easy, it is not. (We decided to build the doors ourselves, which also didn't make the project any easier). Overall, great value and very aesthetically pleasing!

Easy install rollers guilded easily

Easy to install. Seems to be of good quality. Works very well.

We bought the double rail to install two 30" x 48" shutters my father in law made. The rail is perfect, was very inexpensive compared to big box stores. It looks great and it didn't take long for it to be installed.We decided to add a 1" x 6" board to wall first and then attach the rail. Didn't need for anything other than the fact I think it looks better. Caution, the part that attaches to your door (on the pulley like hanger) is about 2 inches wide but the pulley/roller is more like three inches, so you need to make sure the design of your door/shutter allows for that so your doors/shutters will completely come together when closed. In spite of reading this warning in another review, we messed up and had to add that extra piece of wood you see under the hangers in the middle. Still turned out fine and I love my new shutters. Goal is to try and cut down on heat in office during AZ summers.

This product was delivered on time, it was easy to set up. The doors run smoothly on bar and just overall good stuff. Love it and would recommend.

I built two ‘barn doors’ for our church to cover the opening from the kitchen to the fellowship center. The doors were roughly 4’ square, each. This hardware was a breeze to work with. As others have said, there are no written instructions, just pictures, but if you are handy enough to hang a door, you are handy enough to figure that out. Also, a millimeter to inch conversion app may be helpful for you as all the given measurements are in mm.As a word to the wise, you may want to figure out where the roller stops will go and put them on the track before mounting the track to the wall. This is the first set of sliding door hardware I’ve installed and didn’t think that far in advance. It’s not really a big deal if you don’t add them to the track first, but then you will have to slide the stop onto the end of the track, remove a bolt, slide the stop past the bolt, replace the bolt and repeat until the stop is where you want it. Not difficult, but a pain none the less. Also, there are left and right stops, which may not be obvious if you have not installed one before. The Allen wrenches that comes with the kit are not good, you should have another set of Allen wrenches as these will strip pretty quickly.I was very pleased with this set of hardware. Considering how affordable it is, I had some reservations but was pleasantly surprised at how easy it is to install and how well it works. I would highly recommend this set.

This is a smooth rolling, heavy duty barn door rail. I am very pleased but I did need to modify the center bumper pads. Because the rail is bolted at the center of the door opening, the spacer and bolt do not accommodate the two bumper pads to enable the double doors to meet together without a gap. I did what a previous person suggested and cut both spacers. That still did not bring my two doors together without a slight space. I used a grinder to route out the metal in order to accommodate both the round spacer and the front bolt. Although it left me with only 1 tightening screw, it was enough to tighten the bumper pads as well as bring my doors together at the center without leaving a gap. I would definitely buy this again but it would be nice if the company could create a modified center bumper for double doors that need to meet at the center.