🚗 Light up your drive, own the road with every start!
The 71 Inches Hood Light Strip by HConce is a flexible, waterproof LED strip designed for vehicle exteriors. Featuring a dynamic scan start effect, low-power consumption with built-in fuse and short-circuit protection, and durable silicone/PVC construction, it enhances driving safety and style. Easy to install with strong adhesive backing, it fits a wide range of vehicles including cars, SUVs, trucks, and boats.
Item dimensions L x W x H | 71 x 0.19 x 0.39 inches |
Brand | HConce |
Color | White |
Form Factor | Strip |
Recommended Uses For Product | Vehicle Exterior |
Auto Part Position | Front |
Included Components | 1 |
Connectivity Technology | Bluetooth |
Special Feature | Rust Proof, Dust Proof |
Item Weight | 190 Grams |
Material | Rubber |
Water Resistance Level | Waterproof |
Remote Control Included? | No |
Number of Pieces | 1 |
Light Source Length | 71 Inches |
Manufacturer | HConce |
UPC | 768681709345 |
Model | JGD |
Item Weight | 6.7 ounces |
Product Dimensions | 71 x 0.19 x 0.39 inches |
Country of Origin | China |
Item model number | JGD-01 |
Exterior | Polished |
Manufacturer Part Number | JGD-01 |
Special Features | Rust Proof, Dust Proof |
W**D
Good customer service
The lights changed to blue and red only, can't switch between them. Worked only a week.Update: the seller contacted me regarding the quality and sent me a new set at no extra cost and they work nice.
K**E
Would recommend!
Son loves it - has held up well on his truck!
H**A
Malos productos de Amazon
Esto no sirve no lo compré me llegó dañado y estuve investigando y a varios le a salido malo solo una parte enciende da coraje que te vendan algo que no sirve y que intentes devolverlo y tengas que llevarlo a una tienda que te queda a 30 minutos de distancia odio que Amazon vendas estas porquerías y no te percates de lo malo de los productos
R**D
Let There Be Light (in Your Hood)
The media could not be loaded. Ladies and gentlemen, fasten your seatbelts because we're about to dive into the world of the HConce 71 Inches Car Hood Light Strip, a.k.a. "the dynamic car LED strip light." Spoiler alert: I LOVE IT! It's super easy to install (hint: get those fuse taps), it's as bright as a supernova, and it makes my pure white LED 6000k headlights look even more awesome. If you're looking to add some flair to your ride, this is the way to go - just buy it already!First, let's talk about the installation. It's so easy that even your car's manual is jealous. If you want to make it even smoother, those fuse taps are the secret sauce. It's like the automotive equivalent of adding whipped cream to your hot cocoa - a game-changer.Now, onto the brightness. This light strip doesn't just light up your hood; it practically turns it into a runway for UFOs to land. It's like having your own personal sun that follows you around, but without the sunburn risk. It's like your car is saying, "Look at me, I'm fabulous!"In conclusion, the HConce Car Hood Light Strip is not just an accessory; it's a statement. It's easy to install, blindingly bright, and it takes your car's coolness factor up several notches. So, if you want to turn heads, light up the night, and give your ride some personality, this strip light is the answer. Get it, install it, and prepare for a newfound appreciation for your own car.
A**G
Low Voltage reset value
Liked the turn signal option after I had a different white only version (different seller) and thought it was going out so ordered this one. Checked to see if there was any issues pre-install and nothing so installed and 16hrs later last 4 inches of light were out. Contacted seller they said they were aware and it was a manufacture problem they had addressed with them and offered to send replacement. Got second one and no issue with pre-install tests. Have not been able to do reinstall due to recent arm injury so can’t say how long second one will last.Now to the others and a quirk I noticed. 1) this control box is not 100% waterproof. 2) power wires from controller to lights and leads for turn signal inputs are 24-26 gauge (very small). 3 Low Voltage reset value. My ‘18 Ram has a control fuse for all external lights so I installed the power line next to headlights receptacle so it would turn on/off with lights and not be on 24/7 draining battery. Thought it was working fine until I was following a friend and they said that it was constantly ‘scanning’ white light. So started diagnosing issue and found that a .5 voltage drop would cause it to recycle its chip to say it had just received power on signal. That is a very ridiculously low voltage difference for that IMO. So if you’re an owner of a newer car and not electrical savvy might not work out as planned and need to be installed by someone.Now to the quirk. With all that said I disconnected power so that it wouldn’t cycle but yellow lights still work when unlocking car but not for turn signals. Weird right. Will update when I have new installed or figure out voltage issue.
C**Y
Very nice, bright light to make your vehicle stand out!
I absolutely love this light! It makes the truck look so much better at night. I really like the "night rider" effect on start up. I wired mine into the fuse box to turn on with the vehicle so if my Truck is on, it is on. It was very easy to install and has been on for several months now. Zero issues with the adhesive coming loose or not holding up. For the price of this light you absolutely can't go wrong!
D**S
Works ok
The media could not be loaded. Installed this on my SUV. It was easy enough to install once I figured out how to use a fuse splitter. The adhesive that came on it was ok, but I used some 3M automotive gasket adhesive to keep it in place so it wouldn't come off during a car wash or anything. One thing I'll mention is, if you decide to trip the light strip, be aware it will stop working a few inches before the spot you cut it. So if it's 60 inches, and you need to trip it down to say 50 and cut it at 50 inches, it will stop working around 47 or 48 inches. So trim in small increments. Also, because of the startup animation, if you trim it, the animation will not be in sync. It's hard to explain and I didn't capture it on film. Basically, right out the box, the light turns on from each side, meets in the middle, then bounces back. If you trim it, it still does it, but doesn't account for where you trim it. So the distances will be off.
Trustpilot
3 weeks ago
3 weeks ago