Belt Tension In Gauge, Belt Gauge Tool, Adjustable 10 Pounds, with L Shaped Pad, Motorcycle Belt Tension Tool

Worked perfectly to check my belt tension on 03 HD V rod. Simple to use. Nice quality.

Works but shy its black shen belt is black and gauge hoke is black. Had to paint it white so i coikd see it. But it works great

At a fraction of the price of the Harley version of this tool, you can't go wrong. I checked the accuracy of the spring tension of this tool against a calibrated scale and it is right on the money at 10 pounds. My only complaint is that the zero and ten pound markings on the rod are very hard to read, so I enhanced the groove around the rod at the ten pound mark with a small pipe cutting tool. Now it is perfect and I am very happy with this tool.

Works as expected. I tested the device with a digital scale and it was as accurate as you could expect.

Easy to use on sportster belt. Just count the lines on the belt guard, each one is 1/8”, when it gets to the 10 lb mark on the gauge. Set the o-ring on the 10 lb mark so it’s easier to find.

I receive the gauge today. It seems like it needs a little oil because when applying pressure it sounds like metal on metal. If I'm checking tension I would expect the least amount of friction in the tool as possible. I also tested this against a digital scale. The half way mark to ten (5) required 10 lbs. of force. The 10 mark required 20 lbs. of force. Is this normal?

Nice and easy to use

Worked great on my 06 Street Glide, but the part that goes against the belt was too wide. I had to cut one of the edges off with a hacksaw to get it to fit against the belt without hitting the belt guide. However after this minor modification it works perfectly. Build quality is pretty cheap and janky for the price, but it does work.