FIBERFIXTotal Repair - Accelerated Instant Cure Super Glue

I first found Fiberfix at my local grocery store and loved it. It came out of the tube slightly gooey. More like a gel. And when I shined the LED light in the back on it, it cured instantly in less than a second. This made it excellent for things like repairing a glass sculpture where I needed something thick enough to fill gaps, clear, and that cured instantly so I didn't need to use any clamps.My grocery store ran out so I ordered more Fiberfix on Amazon. The packaging is the same, but the actual glue is slightly different. instead of coming out of the tube slightly gooey, the stuff I got at Amazon is very runny.... the same consistently as regular liquid (non-gel) super glue. Also it takes about 2 seconds to cure under the LED light. No more instant cure.I suspect that the stuff I got from Amazon is just fresher. The gooey stuff was probably just older. However, I still like the glue and it still works. I can even make it gooey by partially curing it with the light before applying it.Biggest downside of this glue is the packaging system. Like many super-glues, once the package is opened the glue has a finite shelf life. Come back a month later after opening it, and there's a decent chance you'll find it as hard as a rock. Also the cap has issues unscrewing when you come back to it. If this happens to you try pushing in the cap before turning it.It's also somewhat pricey for glue.Overall I still rate it 5 stars, because there's simply no other glue available that does what this glue can.

I bought this to glue a small piece of plastic on the corner of my laptop. I followed the directions on package. The glue doesn’t want to come out of tube. Had to take top off to get even a small dab of glue out! Glue was like thick jelly! I was able to get a single blob out, thankfully it was enough to glue the 1/2 inch long piece of plastic on my laptop! The glue did set up with light! But I won’t buy this again as it is far too expensive, and far too thick to use, I only got one SMALL use out of entire tube!

I am a huge fan of this glue. I'm now on my 3rd tube of it. I do prototyping so it holds parts very well, and much less mess than typical super glues. The quick cure light works perfect and hardens very tough. The packaging isn't the best, as it took me a while to understand how it works. Now that I know you have to push to unscrew, it works great, and I have no issues with it. It's probably why it has low scores.

This clue seems to be very much like ordinary super glue. The amount of glue in the kit is quite small, not in any way justifying the high price. The light used to accelerate the drying is mostly not useful because most parts fit together and are not translucent.

Edit: I have given this another try because the gluing capability is actually fantastic. You can read my original review below to see what I went through, but you can prevent this if you store it with the screw side up while keeping the pressure on the tube low. Use a paper towel or napkin to clean any residual & the cap should not glue itself closed. I was able to use this multiple times using those instructions. As soon as the cap is redesigned, I'll bump this to a 5 stars.First use was great. The second proved disastrous. It resulted in the lid literally tearing off & gluing most of my hand & wedding ring together. The glue container inside is just an aluminum package which is why it tore. The light curing is great, but the container design shows a poor execution. Reference the photos.*edit: I'm going to give this another try & work with them to prevent this problem & will adjust the review again. Again, the glue itself is fantastic.

I bought 6 of them. All 6 came dried out so no it was a complete waste of my time. Thankfully I we as refunded. They discontinued the old version of this glue and that is the type of glue that I was sent so it seems like it was bought in both by a company and now they are trying to sell it but I believe the reason that it was discontinued is because there was a problem with the packaging which caused all the glue to dry out. The new version of the glue in the better packaging is awesome like the glue used to be. But as far as I know they are not selling that type of glue or they weren't when they sent what they sent to me

This stuff is really amazing! I would give it 5 stars if it wasn’t for the fact that the glue sometimes comes dried up, or the lid itself doesn’t always puncture the top (my last tube I had to puncture by hand). I first tried this glue through their kickstarter, which I believe was to just fix the tube’s design problems, because I did read that somewhere... plus the tube is now blue and I had no problems whatsoever with the blue tubes! The glue from what I can tell is exactly the same as the older model which is fine with me, because the glue is amazing! That’s why I decided to give the older style a try. Unfortunately with the older tube design it’s really a hit or miss if it’s going to work, but I really love this glue! It’s so much better than any other glue I’ve used! It’s basically epoxy, which is what I (as a prop designer) use to fill my molds (epoxy really has so many uses). Now, this little thing clearly isn’t enough to fix a mold the size of a sword! But I was able to fix my little Naboo Starfighter tree ornament’s wing. One wing melted off somehow last year, so I kept meaning to fix it, and then the Kickstarter glue arrived in October and I realize I could just make a quick clay mold out of the other side’s wing and then fill that up with the glue/epoxy! This stuff is really amazing, I only have good things to say about it. Now as for the wing on my thumb sized Naboo Starfighter, it’s not perfect, I technically should give it a little sanding (because the glue is sandable), but it looks surprisingly good for a mold I made in what, 5 minuets tops?? Anyway, I definitely recommend this stuff! It really has so many uses! And if you can buy the blue, newer model, even better!