HumanCentric Adjustable Under Desk Computer Mount and Wall Mount, CPU Holder Fits Most PC or Computer Cases, Adjustable Height and Width, Full 360 Swivel, Up to 22 lb, Hardware Included

Ok first.. I am not related, nor was I asked to leave a review. Second...I rarely leave reviews. Here's why I am leaving this review... This holder is made SO WELL that I can't imagine ever having an issue with it.... Provided it's installed correctly. The metal is much heavier than I expected! It turns as easy as it should without being sloppy. The hardware and little bumper pads are included along with fabulous instructions! It is better than described in the product info! Well done HUMANCENTRIC... WELL DONE! I HIGHLY RECOMMEND THIS PRODUCT!!

wanted to mount a fairly large PC underneath a desk and I really wanted to keep it off the ground. This mount worked perfectly and feel stable and secure.

I installed it two weeks ago and has been a very good solution for my standing desk, making easier the cable management and letting use the desk in sitting and standing height with no worries for the cables being pulled.The only cons I found is that I have a Cougar MG120-G case which has 210 mm (8.27 in) wide and I had to bend a little the top plate to hold it. To be fair, it claims support 7.75 in cases.In a few comments I read the screws aren't good for holding the whole piece but as my desk is high enough, I used the bigger screws (the wall ones).And last, it would be better if the bottom would be a little wider to hold all the base of the case.Apart from that, the material looks strong enough to not worry about it (I'll check it every week to avoid it falls) and I'm very satisfied with the product and the shipping time (it arrived to Chile one week before the expected date)

Easy to install. Make sure you measure and adjust the pc before screwing it in, otherwise it will be very hard to adjust once you permanently install it.

I installed the mount under a wooden table for a new computer and it works perfectly. All the hardware that's required is included and it's more versatile (i.e., other mounting options) than I was aware of.Definitely buy this if you want to get your computer off your working surface.

I have a Fractal Node 202 which is a small form-factor case, and thanks to the clever engineering of this product, it fit perfectly. I removed everything from my desk, mocked it up to the right hand side with enough room for wires (and enough room for some swivel), and then used a screwdriver to put in four screws to mount it to the desk. This came with a few felt tabs to keep the mount from scratching the case, thoughtfully, and I tacked those on and put the case in and tightened everything down. I will let any potential buyer know that the vertical portion is a bit tricky to get right, and I only have one out of two screws inserted in now and it works fine, but just do some testing to get everything to fit snuggly. But it's a great piece of kit that opened up a lot of space on my desk and I'm looking forward to keeping it installed for years to come.

I bought this HumanCentric Adjustable Under Desk PC Mount thinking it would solve my space issues, but boy, was I wrong. First off, the installation was a nightmare - the instructions seemed to be written in some alien language. Even after I managed to figure out the hieroglyphics, the screws they provided were like cheap plastic toys; one of them snapped in half while I was trying to secure the mount under my desk.The so-called 'adjustable' feature? More like a suggestion. My PC case, which isn't even unusually sized, didn't fit snugly at all. The mount wobbled like a loose tooth, making me fear for my PC's life every time I moved my chair. And forget about the 360-degree rotation; it's more like a 30-degree shuffle before it jams up completely.Also, the padding they claim prevents scratches? It's just some thin felt dots that barely stick and don't cover half the areas where the PC touches the mount. I've already noticed some minor scratches on my case, and I've only had it mounted for a week!For the price, you'd expect something robust and well-engineered, but this feels like it was slapped together by someone who's never seen a computer before. Don't be fooled by the 'fits most PCs' claim unless your PC is from the '90s and made of cardboard.Long story short, this mount is not worth the hassle or the money. I'm going back to the drawing board and looking for something that actually does what it promises. Save your desk space and your sanity - look elsewhere.

This is the only wall-mount option that is low-profile enough to work for my application. It's solid and works.HOWEVER, the height set and adjustment screws are all but inaccessible by hand when mounting to the wall. It's actually a ridiculous design; I'm not sure how the engineers expected the installer to access these screws.I had to put 3 bit extenders on my screwdriver just to reach the set screw, and the adjustment screw is still loose. Also you really have to hope that your case height lines up with one of the available adjustment holes, or else you'll have a large gap. I had my wife push up on the bottom with all of her might just to get it lined up while I used my Macgyvered screwdriver to get the set screw in.It looks great now, but I'm not looking forward to the day that I have to take it back down.