Rowenta Iron for Clothes, High Pressure Steamer Iron with Boiler System, 400 Steam Holes, Vertical Steaming, 37oz Tank, Stainless Steel Soleplate, Auto-Off 1800 watts, Black Green, DG7626

I have only been using this for a few weeks but it’s the best iron I have ever owned. I iron everything everyday. Steam is great. It has weight to it that you don’t get in the plastic irons they make today. Easy to fill water reservoir. Would buy again

This review is for the Rowenta DG7626 Compact Steam ProI am a home sewer. I make both garments and the occasional craft project. 15 years ago I bought a Delonghi Steam Generator Iron (a.k.a. Steam System a.k.a. Mini-boiler) and found it to be vastly superior to using an inexpensive iron with a water tank in the handle (which usually drips water on the fabric and doesn't make enough steam.) Also, spritzing the fabric with water while ironing is fine for cottons and may work for quilters but just does not cut it if you are trying to shape seams for a garment or working with fusible interfacing. I stupidly broke my Delonghi and I just can't go back to the old type of iron. Sadly Delonghi doesn't seem to make these anymore. The only brands I found with products in the "low" price range ( $250 to $300) are Rowenta and the Reliable "Maven" model. Over the years on sewing forums I have heard plenty of complaints about Rowenta quality. The Reliable Maven reviews also had a number of complaints and there were a lot fewer reviews. While Reliable's commercial steam systems have a very good reputation, spending over $600 for a professional steam iron doesn't make any sense for a home sewer of only average skill and small output. So after reading a bunch of reviews and shopping all over the internet I decided to try the Rowenta DG7626.The Rowenta iron works differently from the Delonghi. The Delonghi had a big metal water tank with a heavy metal cap that screwed on really tight. It then heated the entire tank of water and once the tank had reached the proper temperature, you had lots of steam and it would only cycle the heat on if the water cooled enough. The Rowenta uses a plastic tank in which the water remains cool, and periodically a pump kicks on to inject some more water into the (much smaller) boiler to generate the steam. The Delonghi (which did not have a pump) produced more steam for a longer period of time, but it took FOREVER to heat up to temperature and produce that first blast of steam. The Rowenta has steam in about 3 minutes. The Rowenta design seems more energy efficient for shorter ironing sessions. The Rowenta is ready much faster but the quantity of steam can drop somewhat as it draws more water to make more steam if you exhaust the smaller boiler. The Rowenta does make a very noticeable humming sound for a few seconds every time the pump kicks on. I think the Rowenta system is fine for my individual needs as I am usually alternating between sewing and pressing steps in my projects, but if you need a LOT of steam in a continuous stream without any variation, this may not be the product for you. The Rowenta did generate enough steam to iron a bed sheet while working continuously. (I did that just as a test, I normally could not care less if my sheets are wrinkled.) The only other downside I can think of for the Rowenta is that this pump is another component that might fail over time.The Rowenta goes into Standby mode (for steam) after 8 minutes of disuse which is not a very long time, and shuts off completely after about 30 minutes. The Delonghi had no auto shut-off -- it would stay on for days if I forgot to shut it off. Some people really don't like auto shut-off but I'm at the age now where I appreciate the safety precaution and I will just work with the 8-minute limit. You need to press a button to get it to come back out of standby and it takes a couple minutes to generate steam again.As with both "steam system" irons, when you first heat up, you want to blast some steam away from your fabric so any condensation sitting in the lines from the previous use can be pushed out. Otherwise you get water dripping on your fabric which may or may not be a problem depending on what fabric you are pressing.The instructions say to use normal tap water for the Rowenta which is good because I am not buying special water for my iron.I have no need for "vertical steaming" so I can't tell you if the Rowenta is sufficient for steaming garments on the hanger. There are other appliances designed specifically for garment steaming that don't have an iron, just a wand that shoots steam -- that might be a better buy.Everything looked good coming out of the box and it is working correctly according to the manual. If the Rowenta starts to have problems I will update this review.

I have always had good experiences with Rowenta irons. My last one I had for at least 8 years and I iron weekly. It did finally stop heating up. I figure that is quite a long life span.This new iron does great. Heats up quickly and it has a good weight to it. Not too heavy or too light. Holds plenty of water. The steam boost button is in a tricky spot for me. It’s right where you grip the handle but that’s not enough negative that I would return.The product description states it has a digital display, which this iron does not. But again, not a deterrent for me.I would but again.

This iron does a nice job of pressing clothes. The tip gets into tight corners, and wrinkles are removed quickly. Unfortunately, the steam setting only works at the highest temperatures. It is easy to fill and heats quickly. It is fairly heavy and my wrist aches with use; the ergonomic design needs to be improved. The setting controls are adjacent to your fingers on the handle, and the heat setting is frequently knocked out of place. Very annoying.

I purchased a Rowenta 9280 1800 Watts. It was a SteamForce Precision Shot stainless steel plate. I took care of it, and it did a great job. I had it for over 8 years. When the autoturnoff switch malfunctioned and could not be repaired, I naturally ordered a replacement model, as it was no longer manufactured, and parts were no longer accessible. The Customer Service rep was rude and condescending and treated me like she was doing me a favor answering my questions. I ordered a new one anyway. The new 9440 U1 SteamForce Plus felt cheap out of the box. What was metal is now plastic. It takes longer to heat up and does not glide as easily as my older model did. Everything about it feels "cheap" from the handle to the power cord. If you wanted a strong, durable product, this one is not it. It has not broken down yet. The faceplate is not stainless steel, which explains why it does not glide easily. There is no self-cleaning button. Worst of all, its made in Mexico and not Germany.

Big fan of Rowenta irons. After my last one stopped working due to my negligence (dropped too many times), I bought another brand at the big box warehouse. Was ok but struggled to get linen or 100% cotton shirts nice and crisp. I could never really get jeans or canvas pants properly ironed. Finally decided I needed a new Rowenta. Only regret is not buying a replacement when I needed a new one. Heavy iron, big soleplate, tons of steam, gets very hot. This iron makes short work of all of my ironing. Jeans, canvas, linen, cotton are no longer an issue. They come out perfectly pressed . You get what you pay for.

I started by trying the more expensive model of Steam force iron, thinking it would be the best but I found it too heavy and it did not have enough fine temperature controls to meet my needs.This model allows for fine-tuning of temperature and has amazing steam production. The steam burst trigger produces a great amount of steam. The weight of this iron is heavier than my old cheap tfal iron but is not too heavy and provides good weight from pressing.My only complaint is that the constant steam output is triggered by the movement of the iron and not by just turning it on, and I often have to shake it to get the steam to start.Not really a complaint but a preference, I prefer to not have my iron time out as I am often back and forth between my sewing machine and pressing. However the iron does heat up quickly so I do not have to wait long before I can use it again. Just would be nice to be able to turn that safety feature off.