Seville Classics UltraHD Heavy Duty Commercial Lighted Workcenter w/Pegboard, 500 lbs. Weight Capacity for Garage, Warehouse, Workshop, Stainless Steel Top, Graphite, 48" W x 24" D x 65.5" H

Solid, well made product. Fairly easy to assemble with good instructions. Nice sturdy bench at a good value.

Amazing quality; well-packed / rock solid. It's challenging to find a high-quality workbench online that doesn't cost three times the price of a 'Seville Classics HD Workbench.' I have been buying, ordering and putting together tools and equipment for more than 30 years. Unlike most, this was packed well; everything was labeled. The setup instructions were clear, and what amazed me over and over was the high quality materials and attention to details.This bench comes with 'extras' others would charge for (light [with bulb]), easily attached power strip, non guesswork instructions,) but the maker/seller priced it right and gives you everything you need for a job well done--no running to the hardware store for this or that--all you will probably want to add is a decent vise that suits the work you plan to do. I recommend this bench, and if other products in the 'Seville HD' line are as well designed and manufactured, a person could set up an entire garage with bench and storage gear from a single manufacturer.Pros:1) Use of welded, threaded inserts throughout--High quality materials--durable finish; extremely well packed (box arrives looking worn due to the weight inside and shipping cross-country, but it's double boxed; interior compartments are Styrofoam reinforced.)2) Any painted surface is wrapped in plastic to help ensure defect-free delivery3) Every screw or bolt went in right the first time; bags of 'extra' screws/nuts/bolts just in case4) Clear instructions and accurate drawings; have a magnifier handy for drawings5) Solidly built / lots of thought evident in packaging and labeling of all parts6) Hardwood top alone (compared to other benches) is worth the price7) Lots of helpful directional labels showing 'top' / 'front' / 'back' / 'left' / 'right' on components where such positioning guidance is needed; makes fool-proof assembly easier8) Drawers are held together with so many screws I have complete confidence in their load-bearing ability;9) Drawer slides were a bit tricky to install -- but follow the manual's advice about loose-fitting the bracket retention mount screws until drawers are setCons:1) I didn't find this product two benches ago!2) Two people are advisable for some assembly steps; I managed with 1 person, a small stepladder and a few Irwin one-handed clamps, but 2 on the job would have helpedGeneral tips:A. Read the instructions -- They're a bit wordy for experienced people, but thorough so novices will get it rightB. Carefully remove hardwood top from inside packaging (it's held as a box-in-a-box); it is packed with Styrofoam sheets that protect it, but had the disadvantage of ‘greasing the skids’ around 50 pounds of hardwood; it slides out very easily -- weight can carry it to the floor (and damage it) in half a second -- I luckily caught mine / no damage.C. Included screwdriver is adequate, but I found a small power driver set on a low torque / low speed moved the job along--use only if very familiar with your driver because it is easy to over-tighten screws.D. have a large work area to set this up -- finished piece sits counter high -- top is 2x4 feet and overall height (floor to top of pegboard,) is a bit over 5.5 feet tall; it takes 2x to 3x that much space to set it up without tripping over yourselfOther than a handmade bench designed by a master craftsman, this is the best bench I have found for the money; it is a solid, well-made piece that is heavy enough to use for metal and wood working, maintenance, a reloading bench or other work that needs storage, counter space, and is substantial enough to hold a 4-6 inch vise. You can mount a woodworker’s vise on either end and there is enough space for a steel or cast iron mechanics bench vise depending on what else is going onto the work surface. This is easily three times the quality of anything you'll find at Harbor Freight and most DIY stores, yet it’s a third to half the price!....If you need a bench that will last for years and stand up to anything except deliberate abuse with a sledgehammer, this is the one!

Easy to put together solidly built. Lots of thoughtful features

I have read all of the five start reviews, as well as all of the others, and I'm sorry for any problems that some of those folks experienced, and I hope that they got them corrected with a minimum of difficulty. The t ruth is that I wanted to give my unit a "six," but the stars stop at five, dang it!First of all, this product arrived, via FedEx, approximately eight days quicker than they estimated that it would, and I took my two wheeler and wheeled the box back to the 10'X12' storage building, in my back yard. I am much luckier, than all the rest of the folks who reviewed this item, in that I had two electricians who were working at my house, at the time, and they actually volunteered to assemble it for me, bless their hearts! When they were finished, they wanted to know where I got it, and I told them, and even showed them on my computer. They are both definitely ordering one, because I did the whole ordering process on my computer, and set the shipping for each of their addresses. For a lazy old man, like myself, this arrangement worked out great!I shall now discuss the "pros" and "cons" of this product, except I have a very pleasant problem. There are no "cons." Now, I have read where there was a problem, with a drawer track, and some light shipping damage but, again, I was very lucky, in that I had no problems whatsoever with any defects, either, since my shipping box had almost no bad spots, or dings on it.Now, to the "pros." This thing is built like a tank! I guess I didn't read the description very thoroughly, before I ordered it, because I didn't expect the "peg board" to be made of metal! I just figured it would be some of that Masonite-based pegboard stuff, like you buy at Home Depot, etc. Look, I know I sound like an overly excited kid at Christmas, but this was very exciting to me, simply because when I first laid eyes on the finished product, I could not believe my eyes! There is a shelf, on top of the unit, and it is a sturdy metal construct, with the light attached underneath it, which more than fills the bill for lighting the work surface. The top is approximately 2" thick, and is solid maple, or some similar hardwood, maybe oak.The drawers are built to perform, you might say, because they have ball-bearing rails, which will enable you to easily open each one of them, if you happened to have put some really heavy items in them. The legs are, and I'm guessing here since I have no way of measuring, approximately 3"X3" and more than adequate for the job. If anything, this unit is overbuilt. It is perfect for what I want, though, since it will be in the aforementioned 10'X12' building and fits perfectly right up against the wall. I had the electricians install an outlet around 4 feet up the wall, where it will be sitting, so that the connections won't be visible. It has adjustable feet, so that you can level it, if need be, very easily. Folks, I wish I could think of something else good to say, about this little jewel, and I know there are more words out there somewhere, but I just can't think of them, at the moment. I'll just close with these three words, and I assure you that I mean them from the bottom of my old, curmudgeonly heart: BUY THIS WORKBENCH!!!